handle bar bushings

[leonard]

when putting on taller bars on your trike did you replace the bushings with the heaver ones. On a 2014 triglide

 

[jc1300]

when putting on taller bars on your trike did you replace the bushings with the heaver ones. On a 2014 triglide

I did...With the rubber bushings and the taller bars they felt a bit mushy. The down side is the bars do shake a bit more at idle. Just my opinion.

jc

 

[consitter]

It's worth the shake (which only happens when stopped). The rubber bushing wear out much sooner, and the whole fairing would have to be removed to replace them. Unless you're a do-it-yourselfer, that's going to cost $$$ to do.

Just my .02

 

[leonard]

bushings

It's worth the shake (which only happens when stopped). The rubber bushing wear out much sooner, and the whole fairing would have to be removed to replace them. Unless you're a do-it-yourselfer, that's going to cost $$$ to do.

Just my .02

which bushings did you use?

 

[consitter]

which bushings did you use?

Nylon.

 

[irmagoo]

if I had mine apart for handlebar change I would replace bushings with good quality urethane bushings ,,, hey its apart ya know
get err done!!
magoo

 

[leonard]

bushings

if I had mine apart for handlebar change I would replace bushings with good quality urethane bushings ,,, hey its apart ya know
get err done!!
magoo

the Harley ones won't work on a trike.