Clutch recommendations

[dwalt68]

Time to replace clutch soon on 2015 triglide looking for good recommendations for upgrade.

 

[dwalt68]

Understand I have mdm mechanical reverse

 

[Notgrownup]

Stock works fine . If you need something that is beefy, look at Barnett.

 

[Gorilla]

I did Barnett and it was great.

 

[dwalt68]

Trying to look up barnett kit can't find fit for 15 triglide pn#?See one that should but match to bike says no

 

[Mykneesbehurtin]

Trying to look up barnett kit can't find fit for 15 triglide pn#?See one that should but match to bike says no

From my understanding, the clutch, primary and transmission will be the same as a two-wheeler.

 

[dwalt68]

Yea my opinion to but JP cycle WEBSITE
Match too bike says no. I'll just call them

 

[Mykneesbehurtin]

Yea my opinion to but JP cycle WEBSITE
Match too bike says no. I'll just call them

Go to your local HD shop and look at the part number for a two wheeler then a trike. That will tell you for sure.

 

[Mykneesbehurtin]

I just looked at Barnetts web site, it looks as though ALL big twins 2011-2016 are the same clutch.

 

[dwalt68]

Yes I went to website I am looking for opinions or clutches, thx

 

[Notgrownup]

The stock ones are actually really good. I took mine out of a 07 with l8me 90000 miles and it looked great. I was upgrading to a bigger motor and installed a Barnett with a stronger spring but I think I really only needed a stronger spring.

 

[dwalt68]

I do ALOT of mountain riding in eastern OK and Ozarks bikes at 28k not slipping yet but softening so planning ahead stock isn't gonna last past 30k w my riding style.

 

[Notgrownup]

I do ALOT of mountain riding in eastern OK and Ozarks bikes at 28k not slipping yet but softening so planning ahead stock isn't gonna last past 30k w my riding style.

Most of my first 60000 miles was In The NC mountains and very aggressive… I put 60k in the first 3 years I had the bike. Barnett makes a badass product, you will feel it on the first ride when you let the clutch out for the first time, it grabs.

 

[dwalt68]

Soo I was concerned, was told if when warms up clutch getting soft meant u need a new clutch. I ordered new clutch from Barnett. Well I was concerned about part numbers so called Harley to double check. Talked to mechanic because I've w any clutch on anything I've have u notice the dragging first all the time. This wasn't the problem, mine was fine until prolonged use. So on hydraulic clutch when it warms up if clutch get worse flush your lines don't order new clutch. Haven't flushed but I'll let u know.

 

[dwalt68]

So just passing on info.