What did you do to Your Tri-Glide Today?

[New Orleans Kevin]

nice ride

Rode about 150 miles then cleaned the bugs off before I put her away. Beautiful day!orag:

 

[PosseRider]

If ur up that way again, holler.

I'm 10 min. away and can give ya the scoop on the places to stay away from

Well we always go to Cranberry's. They were closed, due to no help in the kitchen.!!!! So we ended up at Woody's. OK but not Cranberry's. But we were hungry. I will say ,their Italian sub was huge & not bad.

 

[B Dawg]

d

Well we always go to Cranberry's. They were closed, due to no help in the kitchen.!!!! So we ended up at Woody's. OK but not Cranberry's. But we were hungry. I will say ,their Italian sub was huge & not bad.

Yea there Italian subs are great. If ya go to Woody's again, and in the mood for pizza, the "road kill" is awesome. And while ur there, the stuffed mushrooms are to die for. We always order two, eat one order there and bring the other home. They used to (pre virus times) had a lunch buffet that was good. If you left hungry it was your fault

At one time Cranberry's fish on Friday was excellent but haven't been there lately. Here's a story about a co-owner....https://www.peakofohio.com/news/details.cfm?clientid=5&id=315670

 

[New Orleans Kevin]

New Additions!!!

orag:

700 miles tripping for the weekend to Thunder Beach Rally in Panama City Beach. Had an awesome time with friends music and some upgrades to the TriGlide. I had the painted inner fairing installed, along with the KST Mayhem 12 inch bars, color matched heat shields and Wild Boar audio installed all done by The Fairing Exchange , then decided as they had them in stock and would do them right away a set of chrome Mighty Mites installed by Cycle Solutions. Very happy with all the work ! All the upgrades put a big smile on my face on the way home. KST bars put my hands just where they need to be. Cleaned the bike this morning!!

 

[DOKK]

Oil and filter change for the 3rd time this year. Did this one myself and did the 35k service/inspection. I got the thunder torque inserts from DK but haven’t put them in yet. I’ve got a stubborn baffle. I’ll either have to bring some tools home from work or go get what I need to get it out. I’ll have to sell tools when I retire cause I’ll have to many doubles. Lol.

 

[Halfnormal]

Put my registration sticker on, put my new AZ state flag on, (they sent me a "Don't Tread On Me" flag by mistake first. They said to keep it so it is now hanging in my garage.) Of course I had to go for a ride and make sure the registration sticker was attached firmly and would not fall off. I then gave her a shine when I returned.

 

[rhino 2]

Put my registration sticker on, put my new AZ state flag on, (they sent me a "Don't Tread On Me" flag by mistake first. They said to keep it so it is now hanging in my garage.) Of course I had to go for a ride and make sure the registration sticker was attached firmly and would not fall off. I then gave her a shine when I returned.

View attachment 103843

I think the Stars and Stripes should be displayed on the right side...:Shrug:...

 

[Halfnormal]

I think the Stars and Stripes should be displayed on the right side...:Shrug:...

You are absolutely correct! I will correct that. Thanks for pointing that out!

BTW here are the rules when displaying flags with an American flag

Displaying the Flag with other Flags (united-states-flag.com)

 

[nucseal]

Simpler version:

On motorcycles, the flag must be mounted at the center on the rear of the bike or to the right from the rider's perspective when driving forward, which is referred to as the "marching right." When flown adjacent to a state flag or another type of flag, the American flag should take the marching right position.

 

[PosseRider]

Had the Trike all checked out for next Spring, so it is ready to go. Also, got the new replacement (updated) dampers from ProAction, installed & had Chrome uppers & lowers installed on the front. Looking Good.. :Coffee:

 

[ultrafxr]

Had the Trike all checked out for next Spring, so it is ready to go. Also, got the new replacement (updated) dampers from ProAction, installed & had Chrome uppers & lowers installed on the front. Looking Good.. :Coffee:

I thought about chroming the fork legs when I installed the Legend Axeo fork cartridges but didn't do it. Improves the look for sure.

 

[Halfnormal]

I rode my trike down to Phoenix to winter at my son's house. It was a nippy 49 degrees when I left Flagstaff and warmed up to a nice 85 degrees in Phoenix. We have plans for a lot of weekend getaways!

I went to the dealer to get the needed items for an oil and tranny fluid change and planned on doing that today. This morning when I went to back the trike out, the reverse motor gave out. It does not have a lot of hours on it since it was replaced when I purchased the trike 2 years ago. I am not sure they will warranty the work they did or have to use the extended warranty. I will know in a few days when I bring it in.

All in all a great weekend of riding!

 

[HarrisBikeNut]

What did you do to your Tri Glide today?

I wired up my Hammock heated seat and fitted a pair of Airflow heated grips although I dont seem to have power to them for some reason. Waiting for my new rear shocks and lift plates from DK Customs so thats the next job…..

 

[Notgrownup]

Broke my housing on my reverse motor while rebuilding it …I guess I can keep pushing it…

 

[evermill]

Had warranty work done to fix Trunk seal replaced and front chrome heat shield replaced. The heat shield broke in half, heat and sleet is a bad mixture. Last week installed DK custom 606 air filter, EBS, and oil filter relocation.

 

[Huskerbg]

Added a sheepskin seat cover. The wife said that she was tired of sitting on a hot seat. Found a reference here on the board. $59.00 and $5.00 shipping from Canada.

Motorcycle Sheepskins for Cool & Comfortable Riding | SheepskinShop.com

Got mine at IKEA, $30

https://www.ikea.com/us/en/p/rens-sheepskin-white-70026822/

 

[rhino 2]

Got mine at IKEA, $30

https://www.ikea.com/us/en/p/rens-sheepskin-white-70026822/

Hey.......Bruce ...Welcome to Trike-Talk.........:wave4::wave4:..

 

[hardwickbv]

Just dropped it off to get a new Avon tire put on. Got 21500 out of the last one and was showing a little cord in the center.

I didn't realize I had that many miles on it until I saw the cord.

While it's there I am having them check and adjust the Head bearing and flush the clutch and brake fluids.

Should get it back sometime this week.

Bob

 

[azbob09]

Just dropped it off to get a new Avon tire put on. Got 21500 out of the last one and was showing a little cord in the center.

I didn't realize I had that many miles on it until I saw the cord.

While it's there I am having them check and adjust the Head bearing and flush the clutch and brake fluids.

Should get it back sometime this week.

Bob

Which Avon front did you get, the AV 71 or the av91?

 

[hardwickbv]

Which Avon front did you get, the AV 71 or the av91?

This will be the 3rd Avon I have run the first was a AV71 the last one was a AV91 and this one is a AV91

Bob

 

[1dn5up]

Gona load up for road trip to my Indy to have the Motor Trike reverse installed . Hope my snow mobile suit didn’t shrink …..

 

[rhino 2]

Gona load up for road trip to my Indy to have the Motor Trike reverse installed . Hope my snow mobile suit didn’t shrink …..

Thats what i had put in my 11 Tri-Glide.....Interesting story, Motor Trike sent the wrong cut off wiring harness...So i drove the trike for a week without a cut off before the right one came in...And at least 2 times i forgot to take it out of reverse before i popped it in first...That jammed the transmission and i had to rock the trike back and forth to free it ....

Just in case 'Don't let anyone tell you 'You don't need the wiring harness..

 

[DK Custom Products]

Moved it outside to knock some of the dirt from TX, AZ, NM, CO, & UT off of it. Want to have it clean for the upcoming Open House.

Kevin

 

[DK Custom Products]

Double Tap!

Kevin

 

[ultraclassic01]

Added Dakota Digital Gauges to my 2016

Could not be happier with the outcome of these gauges. A moderate learning curve but they did every thing I wanted.

They also have great customer support.

 

[Zammy]

Got a breakfast run in today, Jo Ann had shoulder surgery 6 weeks ago and was feeling good enough to give the trike a go. We only did 72 miles total and she was ready for the ice packs when we got home but she is coming along a little bit each day.

 

[rhino 2]

Got a breakfast run in today, Jo Ann had shoulder surgery 6 weeks ago and was feeling good enough to give the trike a go. We only did 72 miles total and she was ready for the ice packs when we got home but she is coming along a little bit each day.

A little at a time and a lot of ice.......:clapping:...

 

[Mykneesbehurtin]

I finally was able to reach the heel shifter after knee replacement, so since it was 60 degrees Dec 15th in Ohio I had to take a short ride. Man it felt great, still not comfortable enough to try the Road King.

 

[New Orleans Kevin]

Today

Ordered a 606 naked cleaner with premium catch can from DK then rode150 + miles to Biloxi and back, then cleaned it up before putting it away.

 

[Zammy]

Actually nothing !!! We had good intentions for a long breakfast ride today. got up at 7, looked outside and couldn't see across the street. The sea fog didn't lift till around noon, everything was really wet, we'll have to try another day. Right now it's starting to roll in again so tomorrow is probably out also.