CSC drive shaft question on 06 Goldwing

[pelon]

mounting plate pics

post a picture of the bottom of the mounting plate

here's a few of the mounting plate.Are the bolts with the 12 point head the ones that need removed ?

 

[ROAD DOG]

here's a few of the mounting plate.Are the bolts with the 12 point head the ones that need removed ?

second picture, the four 12 point bolts take them out move the center section back a bit put the drive shaft in bolt it back together.

 

[pelon]

CSC drive shaft

second picture, the four 12 point bolts take them out move the center section back a bit put the drive shaft in bolt it back together.

Ok -will give it a try after work.

 

[pelon]

MM shaft install

second picture, the four 12 point bolts take them out move the center section back a bit put the drive shaft in bolt it back together.

I removed those 4 bolts and the rear end won't budge.I still say it won't move because it's still bolted to the transfer case which is bolted to the frame.If i have to separate the rear end from the transfer case i might as well take the whole thing apart and buy the CSC upgrade kit.I don't know if there's a difference but this goldwing is an 2003 not 2006 as the thread title says - my bad.frustrated...

 

[pelon]

shaft install

second picture, the four 12 point bolts take them out move the center section back a bit put the drive shaft in bolt it back together.

I just found out that the 06 shaft is longer than the 03 so it's not going to fit .Thanks anyway.

I need to find one that fits a 2003.

 

[ROAD DOG]

I just found out that the 06 shaft is longer than the 03 so it's not going to fit .Thanks anyway.

I need to find one that fits a 2003.

What year is your trike ?

 

[rhino 2]

What year is your trike ?

He originally thought it was a 2006, but it’s a 2003..

 

[ROAD DOG]

He originally thought it was a 2006, but it’s a 2003..

His post says I have a 2006 ?

 

[Jack Klarich]

He originally thought it was a 2006, but it’s a 2003..

How in Hell can one not know what year their ride is?

 

[rhino 2]

His post says I have a 2006 ?

He did an “Oh Shit Moment” and corrected it....

 

[pelon]

shaft install

His post says I have a 2006 ?

I messed up the year and then i couldn't edit once i noticed it.I'm gonna take the drive shafts to a drive shaft repair shop and see if they can swap the front yokes.

 

[rhino 2]

How in Hell can one not know what year their ride is?

Hey..It happens …Just the other day while I was on my morning coffee run I couldn’t remember if I was wearing my helmet or not....

 

[pelon]

year of bike

How in Hell can one not know what year their ride is?

settle down francis-I just bought the bike .

 

[Marc H]

I removed those 4 bolts and the rear end won't budge.I still say it won't move because it's still bolted to the transfer case which is bolted to the frame.If i have to separate the rear end from the transfer case i might as well take the whole thing apart and buy the CSC upgrade kit.I don't know if there's a difference but this goldwing is an 2003 not 2006 as the thread title says - my bad.frustrated...

Sorry I forgot about the transfer case being mounted to the frame.If you haven't already read this it will help you understand how that part is made.

https://img1.wsimg.com/blobby/go/19...Driveshaft Retro 5-2021.pdf?ver=1692992354982

 

[ROAD DOG]

settle down francis-I just bought the bike .

I just went & looked through a mountain of paper work & found the mountain man instructions =. Do you have a fax machine I can fax them to you in the AM. If you dont use the driveshaft send it back to me. This was out of a 2008, I thought that the driveshaft could collapse, slide in & out ? I don't no.

 

[pelon]

shaft install

I just went & looked through a mountain of paper work & found the mountain man instructions =. Do you have a fax machine I can fax them to you in the AM. If you dont use the driveshaft send it back to me. This was out of a 2008, I thought that the drive could collapse, slide in & out ? I don't no.

It does collapse but the front yoke is about 1.5 inches longer than the oem yoke. it is still to long.I'm taking to a drive shaft shop to see if they can swap the yokes.

 

[Jack Klarich]

Hey..It happens …Just the other day while I was on my morning coffee run I couldn’t remember if I was wearing my helmet or not....

What I don't understand is how you can buy a trike/ bike not knowing what year it is.

Looking at the paper work and title should be a clue YES?

Or am I missing something here?

 

[cScjhb]

What I don't understand is how you can buy a trike/ bike not knowing what year it is

Looking at the paper work and title should be a clue YES?

Or am I missing something here?

I think what you're missing is Honda trikes are a kit. The kit may not be the same year as the bike..... and they usually are different years. The OP is dealing with kit problems. You need to get the serial number of the kit to determine its year. The year of the kit will not show on the title or registration. I know my bike and trike kit are different years..... Jim

 

[pelon]

jack

What I don't understand is how you can buy a trike/ bike not knowing what year it is

Looking at the paper work and title should be a clue YES?

Or am I missing something here?

GO FUCK YOURSELF JACK !

 

[ROAD DOG]

GO FUCK YOURSELF JACK !

SAME TO YOU PELON

 

[rhino 2]

Make love not War…..Just Nuke them first…:blowup:

 

[pelon]

Shaft install

SAME TO YOU PELON

I wasn’t referring to you .

 

[ol' school]

GO FUCK YOURSELF JACK !

Pat, you are out of line! We don't act like that on this forum. I think a serious apology is in order here.

 

[Papa Zook]

I wasn’t referring to you .

I don't care who you were referring to, you don't tell anyone here to Go F Yourself. These guys are trying to help you, one of whom sent you a FREE drive shaft, thinking you were a decent guy.... We are family here and you are not, so straighten your shit out with Jack and Apologize or Piss Off and be banned!

 

[trike lady]

I was going to say rudeness will not be tolerated.

 

[pelon]

Yawn

I don't care who you were referring to, you don't tell anyone here to Go Fuck Yourself. These guys are trying to help you, one of whom sent you a FREE drive shaft, thinking you were a decent guy.... We are family here and you are not, so straighten your shit out with Jack and Apologise or Piss Off and be banned!

You bore me !

 

[Papa Zook]

Anyone else get the feeling that Pat just doesn't know how to play well with others?

Bye Felicia!

 

[ROAD DOG]

Anyone else get the feeling that Mrs Pat just doesn't know how to play well with others?

Bye Felicia!

T H A N K Y O U

 

[tourman]

I don't care who you were referring to, you don't tell anyone here to Go Fuck Yourself. These guys are trying to help you, one of whom sent you a FREE drive shaft, thinking you were a decent guy.... We are family here and you are not, so straighten your shit out with Jack and Apologise or Piss Off and be banned!

Talk like that should be a immediate ban! Very offensive to me and I'm sure others

 

[rhino 2]

Anyone else get the feeling that Pat just doesn't know how to play well with others? :laugh:

Bye Felicia!