Hi everybody. My wife and I are new to this site and fairly new to the trike world. We had a Champion IRS trike kit installed on our 2006 Goldwing last Sept. We didn't notice anything wrong till riding with some other riders and they told us that our rear wheels were really leaning in (negative camber). When we got home, I checked the negative camber using a carpenters square against the wheel and it showed a one inch difference between the top of the sidwall and the bottom sidewall.
There is about an inch of the outside of the tread on the tire that isn't touching the pavement. In my opinion, this is going to cause some very uneven tire wear. I know that the independent suspension is fairly new to Champion and there aren't that many on the road. Are there any riders on this site that have this conversion and any of the problems we have with our bike? I'll try attaching a couple of photo's.
Thanks for your time.
There is about an inch of the outside of the tread on the tire that isn't touching the pavement. In my opinion, this is going to cause some very uneven tire wear. I know that the independent suspension is fairly new to Champion and there aren't that many on the road. Are there any riders on this site that have this conversion and any of the problems we have with our bike? I'll try attaching a couple of photo's.
Thanks for your time.
Last edited by a moderator: