A Day in the Life...

[DK Custom Products]

Sorry to say there would be a price to pay for messing with me. It is just who I am. I have had June bugs leave welts on my face many many yrears ago alsso Locusts Zero tolerance for insects. :sneakydevil:

:laugh: I hear ya...and a few years ago when a hornet started stinging Mary...she made quick work of it, squishing it dead.

Kevin

 

[DK Custom Products]

Yesterday was interesting at the shop....everyone was out looking at the eclipse thru a welding helmet.

At the peak, the sun was about 93% covered.

While we could see the crescent very clearly thru the helmet lens....

...we could not get a photo of what we were seeing.

What was most surprising was how light it still was, even with 90+% of the sun covered.

Photo of Devin taking a photo at the peak eclipse in our area...

...even though we could see (thru the welding helmet) that almost the entire sun was eclipsed by the moon. The cameras could not tell it.

Later in the day...around 7:40 pm, this is what the sun looked like on my ride home.

Kevin

 

[DK Custom Products]

Never made it to the shop yesterday.

But I did get to ride all three bikes for about 300 miles total, And get a lot of work done.

First stop was at an HD Dealership...

...wanted to see if they had any 18's yet. No go. The truck is scheduled to drop 3 units off tomorrow (Friday).

Next stop was Cycle Therapy.

Dropped the Sporty off to get the rear tire replaced, and the quick-release valve rebuilt.

Trading the worn out 402 (too many burn-outs ) for a new American Elite.

Picked up the Softail. It's been there getting some warranty work done. I've only ridden it about 120 miles since picking it up yesterday, but it seems like they did some great work. I asked them not to clean it...so the dirty whitewalls is not a poor reflection of their work.

Work done:

Installed new front tire that I dropped off with the bike

Installed new rear tire under warranty (I'd picked up a nail)

Replaced one rear shock under warranty

Fixed pulling to the left under warranty

I then headed off to two different appointments in Memphis...no pics.

Then stopped at a different HD Dealership where I was scheduled to take photos, videos, and test ride a couple of 18's.

Unfortunately the truck had not arrived yet...It has been rescheduled for delivery on Friday also. So hopefully I will be doing all that tomorrow! No Pics.

I then rode home, parked the Softy, and Mary and I got on the Tri-Glide and headed back up to Memphis for Bike Night on Beale Street.

Doesn't happen often, but it's sorta fun to ride 3 totally different HD's in the same day.

Kevin

 

[DK Custom Products]

Ride to work this morning.

Who needs a cage? Not me, I have bungee cords.

Kevin

 

[Zammy]

Lol, one of the best all purpose tools ever designed.

 

[DK Custom Products]

Lol, one of the best all purpose tools ever designed.

 

[DK Custom Products]

Yesterday I spent a few hours at one of our local HD Dealerships.

Test rode a Fat Boy, and spent a good deal of time looking over the FB and a Heritage.

There is a Report with photos and video, along with my impressions, at this LINK.

Here are a couple of pics-

Kevin

 

[DK Custom Products]

A few days behind...but last Wednesday we were up at Beale Street again for Bike Night.

No, it does not get old...thousands of bikes and people, good food and conversation with Mary. Plus last Wednesday was pleasantly cool....low 80's.

We got there early....

...but with it being the first cool Wednesday in quite a while...

...it started filling up earlier than normal.

Very cool "Rat Scooter" went by...more pics later.

In this pic are two Harleys, a Victory & an Indian...sign of the times.

Sunset-

It was cool enough that we went for a walk up and down the street.

This is looking west....

...and this is looking east.

More in next post.

 

[DK Custom Products]

Ran up on the Rat Scooter.

Quite a bit of creativity in it....

...I missed the keyboard until Mary pointed it out to me. lol

Both side streets, off of Beale...

...were starting to fill up also.

Some paint that...

...caught my attention. Very detailed work. Photos do not do it justice.

Heading back up to the trike...

...for a nice ride home.

Kevin

 

[DK Custom Products]

Brushing up on my riding skills. lol

Kevin

 

[Jack Klarich]

Brushing up on my riding skills. lol

Kevin

Looks like takin a dump in style

 

[DK Custom Products]

Kevin

 

[DK Custom Products]

Forecast of 5-7 inches of rain, flash flood warnings. Tornado watch, plus it's cold!

I borrowed the wife's truck to come into work this morning.

Did not feel like being this guy today!

Kevin

 

[DK Custom Products]

Today is the big day we have been working toward for over 2 months!

We are moving our shipping facility from one location to another...it is only across the street, but every item on the shelves needs to be counted and then carried across the street to the new BINS.

Along with the move is a complete change in our inventory control software going into effect as we make the move.:clapping:

I'm riding up to Memphis shortly to start counting. lol

We have over 20k parts that need to be counted. :cxtv:

Kevin

 

[BillR]

Forecast of 5-7 inches of rain, flash flood warnings. Tornado watch, plus it's cold!

I borrowed the wife's truck to come into work this morning.

Did not feel like being this guy today!

Kevin

At first glance, I thought that was a jet ski. WOW

 

[Jack Klarich]

Do u need any help?

 

[frostbite51]

I'm going to sell my trike...

..or burn it or run it off a cliff...

Decided to run down to the tourist trap to see how busy they were (wall to wall) on this last weekend of summer. Didn't get 10 miles out of town before I got nailed by a bee. Really? Third time in 4 weeks. I thought maybe it's because I'm such a sweet guy, but it never happens on the Dyna. Trike must be hexed.

There's a 12 mile stretch of I94 to get to the trap, so I'm doing 80 and come up on a slow-mo trailer. I start to pass and found this:



Did a quick stop at the next exit and snapped a fast one. He was putzing along at 55, enjoying the ride.

Traveled the back roads home and got the mandatory trike in scene pic. Some more ND landscape:



Filled gas before I left. 20 cents higher than Thursday, $3.049 for prem. Got 42 MPG on that tank...

 

[DK Custom Products]

The ramp up into my bike room has been getting a few soft spots in it, and one spot that had collapsed...

...it made it a bit "fun" when going down the ramp if one of the tires got in that "low" spot.

The problem was that we did not paint or protect the wood where it was in contact with the ground...so it just soaked up the water and got mushy.

The frame is actually quite strong, and in good shape...

...although I did go ahead and put a couple more supports in it, and paint the exposed surfaces.

I'm also replacing the 5/8" plywood with 3/4" plywood.

Yesterday afternoon we stopped after giving the plywood a good heavy coat of paint.

This afternoon I will be putting plastic edging on the bottom edge of the plywood, so that when water is setting, it will not get into the wood. Then attaching the plywood to the frame, and then putting some new roofing material on it.

By tonight I should be able to get my bikes out of the bike room where they have been stuck.

Kevin

 

[DK Custom Products]

..or burn it or run it off a cliff...

Decided to run down to the tourist trap to see how busy they were (wall to wall) on this last weekend of summer. Didn't get 10 miles out of town before I got nailed by a bee. Really? Third time in 4 weeks. I thought maybe it's because I'm such a sweet guy, but it never happens on the Dyna. Trike must be hexed.

There's a 12 mile stretch of I94 to get to the trap, so I'm doing 80 and come up on a slow-mo trailer. I start to pass and found this:

View attachment 48915

Did a quick stop at the next exit and snapped a fast one. He was putzing along at 55, enjoying the ride.

Traveled the back roads home and got the mandatory trike in scene pic. Some more ND landscape:

View attachment 48916

Filled gas before I left. 20 cents higher than Thursday, $3.049 for prem. Got 42 MPG on that tank...

Great photos!!!

But, what's up with you getting stung so much??? :Shrug:

Kevin

 

[DK Custom Products]

At first glance, I thought that was a jet ski. WOW

Yeah, crazy stuff riding thru that deep of water on a HD.

Do u need any help?

It was NOT fun...be very happy you missed it. lol

Kevin

 

[LadyonaMission]

Great photos!!!

But, what's up with you getting stung so much??? :Shrug:

Kevin

Must be wearing too much foo-foo floral aftershave!!!

 

[frostbite51]

While my beard is not as grand as Zook's, it does mean no shaving, or aftershave...

 

[DK Custom Products]

Wow! Not sure what's up with the weather...but it has been a very mild summer for us...and last night was in the low 50's!

This morning was the first time I've worn my leather jacket in many months.

Looks like it will be in the 50's each morning on the ride in for a while. Crazy for us at this time of year.

Kevin

 

[Fearless]

Wow! Not sure what's up with the weather...but it has been a very mild summer for us...and last night was in the low 50's!

This morning was the first time I've worn my leather jacket in many months.

Looks like it will be in the 50's each morning on the ride in for a while. Crazy for us at this time of year.

Kevin

Kevin we have seen the 40's already in the mornings Maple trees are loosing green leaves. kinda stinks Fred

 

[1dn5up]

Had a watermelon stewing at the gamp for a while. Figured it must be getting wierd by now . So on this damp rainy day it got cut up, put into the blender, added some peach snaps and vodka , and wallah

 

[Jack Klarich]

Must be wearing too much foo-foo floral aftershave!!!

LOL, have not heard foo foo for a long time

My dad said foo foo juice

 

[paws]

Our motor home had foo-foo lights...what I called them anyways.

 

[DK Custom Products]

Finished up the ramp...

Put heavy plastic at the top and bottom edges, along with some edging on the bottom to keep water off the wood.

Done securing it to the frame with wood screws.

Rolled out the roofing, and set it in place.

Still need to screw the roofing material into the ramp, but I've been using it the last couple of days as is. Will get it done this weekend.

Kevin

 

[Jack Klarich]

Nice job, Florida could use your help building roads:clapping:

 

[DK Custom Products]

Riding into work this morning, sky was sunny & clear, temp was 60* and I was thinking perfect riding weather...almost kept riding instead of going to the shop.

Kevin