Trike Dyno Locations

[stillOn2wheels]

Suburban Speed
139 North Main Street
Thiensville, WI

Attached to Suburban Motors (Harley Davidson)

Thiensville, Wisconsin, Harley Davidson Performance Packages, Apparel, Parts, Tools, Dyno Charts

They can accommodate an array of tuners including TTS.

My wife has a 2010 Tri-glide. Although we have a great tuner in the area of where we live (Northern IL), he does not have a two-track Dyno. I found a tuner by doing a search on the Dynojet website for a dyno center with a 250 IX (2 track Dyno. I found a Harley Dealer just outside of Milwaukee, WI that had a speed shop attached equipped with the 250 IX. I called them and discussed the fact that they were a little over a hundred miles away and could we make an appointment. They quoted a four hour labor rate although they spent more time. Well worth the cost!

I am totally impressed with the job that they did. Unlike a lot of places that simply shove a sniffer up the tail pipe as far up as they can, these guys do it right. The sniffed the exhaust gasses off the front and rear cylinder head pipes directly a couple inches down from the cylinder head.

The first thing they did was cam timing and then went to work on the map. Her Trike has a fullsac head pipe and fullsac 2" muffler cores, Andrews 54 cams, and a Alren Ness Big sucker air filter.

My wife cannot Believe the difference in heat reduction, and get up and go.

These guys are good!

 

[arnie]

Isn't engines by Otto near you? I was thinking of going there.

 

[msocko3]

Isn't engines by Otto near you? I was thinking of going there.

Last I knew Otto's dyno didn't support trikes, unless he's upgraded lately.

 

[HarleyGirl60174]

Hi Guys from the better half whose trike has now been transformed into a rocket ship. Otto is the best in the area but only owns a one track dyno and has to trailer the trike to a speed shop with a two track (adjustable). Since he is a one man shop, making an appt with him and waiting for his availability could be weeks. Suburban not only took me the same week I called for the appt, because we were coming from a distance, they graciously agreed to do it on a Saturday so we could wait for it. The bike is out of this world, I fought getting the dyno done, didn't really think it would make a big difference and it is amazing.., that is the only word I can use for it. Leaving on Thurs for Wash DC with my HOG Chapter to attend Rolling Thunder and can't wait to hit the road.

 

[KRUZR]

Last I knew Otto's dyno didn't support trikes, unless he's upgraded lately.

Otto hasn't upgraded his Dyno. He helped me with my VTUNE after installing the 222 cams.

 

[plleonard]

Brandt's Wabash, IN

 

[427dave]

Doc's Harley Davidson in Shawno/Bonduel Wisconsin. He just got the trike dyno.
Home to the Worlds Fastest Fuel Burning Panhead.

 

[rider1234us]

so what's septs?

 

[msocko3]

so what's septs?

Screamin Eagle Pro Super Tuner.

 

[Goober]

Colonial Harley Davidson
1701 Temple Pkwy.
Prince George Va. 23875
804-861-4700
They are about 20 miles south of Richmond,Va Off I 95
Did a nice job on my 2013

 

[Hernandovan]

Iron horse bike sales lean to fl. Billy has a Dino that will handle a trike and does a great job of tuneing. My 2012 glide with true duals , bubs mufflers and k and n filter made 103 fps tourqe and 91 horse.

 

[Hernandovan]

That is lecanto fl and a dyno my fingers are kinda dumb sorry

 

[GoSlo]

I just found out that Aspen H-D in Glenwood Springs, CO has a trike dyno. I'm scheduled to have my 2013 TG done in August.

Anyone used them before? :Shrug: If not, then I'll report back on how I think they did.

 

[zoood]

Tilley's HD in Statesville NC has a Dyno room for trikes.

Does it have to be a Harley Engine? Ive a 113 Ultima.

 

[msocko3]

Does it have to be a Harley Engine? Ive a 113 Ultima.

I would think they should be able to do EVO based engine, the principals of tuning are the same.

 

[bobknife]

Afles Harley Davidson in Wichita Kansas closed on Mondays has dyno for trikes. With set of 255 cams and vance and hines true duals SE tuner klocks work 4in slash down mufflers and SE air cleaner they got me 76hp and 104 foot pounds of trk this is less than expected but does run a heck of a lot cooler and has great power from 1500 to 4500 rpm ride 2 most of the time.

 

[Bushman4]

I've dynoed many trikes with automotive chassis dynos

 

[KRUZR]

Has anyone with a CSC Daytona conversion been able to have their Trike Dynoed. It won't fit on Suburban's HD 250IX. This is the second shop to give me the bad news.

 

[GoSlo]

I just found out that Aspen H-D in Glenwood Springs, CO has a trike dyno. I'm scheduled to have my 2013 TG done in August.

Anyone used them before? :Shrug: If not, then I'll report back on how I think they did.

Took the TriGlide into the dealership in Glenwood Springs and they do indeed have a dyno. Unfortunately, what they don't have is a dyno operator that has a clue. It's about 160 miles back home and the damned thing pinged, binged, and bonged the entire way back. Could feel a bit more power and torque, but what a mess. Knew I'd have to find someone else now.

It took a while, but finally brought the trike to the place I originally wanted to do the dyno. It's a place called Speedwrench in north Denver. This guy knows what he's doing and came highly recommended by a lot of people. He does have to rent time on a car dynojet to fit the trike, so there was some extra cost involved, but as far as I'm concerned, it was worth every penny. He's got the trike tuned and it runs great. No more pinging and runs good on our corn gas out here. He said the rear cylinder was running a lot leaner than the front so he obviously worked on both cylinders, which I was glad to hear. All in all, I'm really happy with the way the trike runs now. Turns out he's also puts the TTS on almost all bikes that add a tuner. He said he prefers the TTS, but works a lot with the SEPro.

He said that he downloaded and looked at the tune that the guy in Glenwood Springs did and that they only put in a "canned" map and adjusted nothing else. The dealership claimed that they couldn't do anything more because my system was too restrictive. Really? SE air cleaner, SE exhaust, and a Fulsac Sportpipe header with no cat. They said it just won't flow and that if I wanted it to run right, I'd have to buy true duel exhaust and head pipe from V&H. I hate to bust on someone like this, but they don't know what they're doing and wanted to let everyone on this site know about it so they don't go there if thinking about it.

It was great finding someone that really knows what they're doing!!

 

[Nana]

Buckmninn's D & D Harley Davidson in Xenia, Ohio just dynoed my trike last week. It's a great shop with a great crew..... and it is less than a mile from my house. What more could I ask!

 

[Hdsteal]

Suburban Speed
139 North Main Street
Thiensville, WI

Attached to Suburban Motors (Harley Davidson)

Thiensville, Wisconsin, Harley Davidson Performance Packages, Apparel, Parts, Tools, Dyno Charts

They can accommodate an array of tuners including TTS.

My wife has a 2010 Tri-glide. Although we have a great tuner in the area of where we live (Northern IL), he does not have a two-track Dyno. I found a tuner by doing a search on the Dynojet website for a dyno center with a 250 IX (2 track Dyno. I found a Harley Dealer just outside of Milwaukee, WI that had a speed shop attached equipped with the 250 IX. I called them and discussed the fact that they were a little over a hundred miles away and could we make an appointment. They quoted a four hour labor rate although they spent more time. Well worth the cost!

I am totally impressed with the job that they did. Unlike a lot of places that simply shove a sniffer up the tail pipe as far up as they can, these guys do it right. The sniffed the exhaust gasses off the front and rear cylinder head pipes directly a couple inches down from the cylinder head.

The first thing they did was cam timing and then went to work on the map. Her Trike has a fullsac head pipe and fullsac 2" muffler cores, Andrews 54 cams, and a Alren Ness Big sucker air filter.

My wife cannot Believe the difference in heat reduction, and get up and go.

These guys are good!

What did it cost you?

 

[msocko3]

Buckmninn's D & D Harley Davidson in Xenia, Ohio just dynoed my trike last week. It's a great shop with a great crew..... and it is less than a mile from my house. What more could I ask!

Nice to know we have another good location in Ohio.

 

[tbear]

You got Roeders in Ohio,Napoleon Harley and one in Bowling green.
As for Michigan: Adrian colleage,Biker Bobs in Taylor Mi,Detroit HD in Farmington, Mi, and E&B in Monroe,Shiwawashee in Frankenmutch,Mi

 

[tom w]

Robert at 4 rivers h.d. in paducha ,ky. did a great job .

 

[dfpk]

Still looking for someone in the Houston, TX area who can dyno my tri-glide.
Thanks, Dale

 

[PinkE]

horse power Inc Gasoline alley Indianapolis Indiana

 

[roadking2]

Adventure Harley Davidson in Dover , Ohio has a trike dyno. They have had it for about a year or so. I've never had one done there, and don't personally know anyone that has, but I do know they have one for trikes, and they do a pretty good job with their 2 wheel dynos.

 

[Jwinterstein]

I have had my 113 CI 2011 Harley Trike dynoed at Legacy Harley Davidson in Effingham, Il and they did an excellent job. Major difference in the outcome. Ended up with 102 HP and 103 lb ft. of torque and it comes on strong at 3000rpm and continues right up to 5,000

 

[PopDukes]

I too have been unable to locate one in CA. How about Vegas?

 

[msocko3]

I too have been unable to locate one in CA. How about Vegas?

There are some in Reno, http://www.renohd.com/. If you look in this list from Dynojet http://www.dynojet.com/dyno_centers/motorcycle_dynocenters_output.aspx?state=NV for a place with a 250ix they could dyno a trike if they know how to us the tuner you have.