Question

[Davep]

somehow I lost a couple of the screws that hold the outer faring on my 2011 Triglide, does anybody know what size I need to order? the local auto parts has nothing and the Harley dealer is 2 hours away

 

[Jack Klarich]

somehow I lost a couple of the screws that hold the outer faring on my 2011 Triglide, does anybody know what size I need to order? the local auto parts has nothing and the Harley dealer is 2 hours away

1/4x20 x5/8 Torx 27 bit

 

[Davep]

1/4x20 x5/8 Torx 27 bit

thank you

 

[Davep]

not sure what these are called, but can I remove them? i think I would like it better without them

 

[Papa Zook]

Hey Dave,
These are called Lower Fairings and yes they can be removed.

 

[Davep]

is it something I can do myself?

 

[DK Custom Products]

Yes, on your 2011 the lower fairings can be removed.

Here is a photo of our 2011 Tri Glide with the lower fairings removed, and with the engine guard powder coated black.

On 2014 and newer Tri Glides they cannot be removed because they house the radiators for the Twin Cooling.

Kevin

 

[Papa Zook]

is it something I can do myself?

Sure, so long as its not a "water head". What year is your bike?

 

[Davep]

Sure, so long as its not a "water head". What year is your bike?

2011

 

[Davep]

Yes, on your 2011 the lower fairings can be removed.

Here is a photo of our 2011 Tri Glide with the lower fairings removed, and with the engine guard powder coated black.

On 2014 and newer Tri Glides they cannot be removed because they house the radiators for the Twin Cooling.

Kevin

I like the looks of that

 

[Davep]

got them off, that wasn't so hard

 

[Papa Zook]

got them off, that wasn't so hard

I took them off the last Ultra I had too.

 

[Davep]

I took them off the last Ultra I had too.

Ebay has the quick connect kit for 23 dollars. reviews say it works fine

 

[DK Custom Products]

Ebay has the quick connect kit for 23 dollars. reviews say it works fine

That, or you can carry soft lowers with you and if you run into cold or wet weather, you can put them on in less than 5 minutes.

This photo we are in the Yukon, on the ALCAN. I put them on because of the muddy "Highway". You can see they caught quite a bit of mud.

The following photo is not of mine, but similar design. They slip over the engine guard and then clip in place. I like these because they take very little space to carry, and I always have them in case they are needed/wanted.

Kevin

 

[Davep]

do you sell those?

 

[Seaweed]

I have them for my E Glide. Cordura material, came from Harley, quick on & off. Not sure if they still make them but they are really nice when it gets cold. HD says not to use when temps are above 50 F. The also have an open spot if you want to put highway pegs on. Or I should say they would fit over them.

 

[Marc H]

Motorcycle Chaps | Engine Guards | Soft Covers | Quality Made in North America | Airlite Motorcycle Engine Guard Chaps

Keep warm and dry with Airlite motorcycle chaps. You are more alert to your surroundings. Being more comfortable you are less likely to compromise your safety by being in a rush to get to your destination. Cut down the cold wind and rain and treat yo

www.airlite.ca