Greasing Lehman Monarch II trike

[Tinman701]

finally found grease fitting for the rear u joint everyone talks about. Now how do you get a fitting on it? No room for a grease gun short of taking it apart that I can see. Any suggestions would be appreciated. Also this is on a 2010 GL 1800.

 

[dogman513]

I just crawl under mine attach grease gun..???? Move bike to put fitting where easiest to reach...

 

[cavie]

Your grease gun will need to have a flex hose on it I'm guessing.

 

[Mick]

Use a grease gun with a flex hose and you should be good.

 

[Shimpy]

Use a grease gun with a flex hose and you should be good.

I also like mine from Harbor Freight that is pneumatic. Just connect the air hose and pull the trigger. No need to have room for operating a handle.

 

[OscarV]

Is there more than one point on the rear U joint that needs to be greased? How about the front? I bought the grease gun and plan on doing the work this weekend. Thanks.

 

[Lee H. Mann]

Is there more than one point on the rear U joint that needs to be greased? How about the front? I bought the grease gun and plan on doing the work this weekend. Thanks.

On the Monarch II there is only one point where greasing is necessary. The front joint is the OEM Honda joint and is not able to be greased.

 

[OscarV]

Thanks for the quick response Lee.