2011 tri glide cams

[Hdivy]

What be a good cam set up for more bottom end.

head pipe no cat

after market air fitler

tuner

After market muffler

 

[Tireman]

I bought a 2011 Triglide in June of 2019 from the original owner. It had 30K miles on it so I wanted to check out the cam tensioners and bearings. I found that it had the S&S 551G cams in it! With the stock 30t trans sprocket it had all kinds of get up and go which impressed me especially after riding my 150+hp Street Glide!!!

Of course I couldn't leave it alone so 3 months later I had the heads ported by Jim @ Mega Flo. Wes Brown at Cyclerama found a set of his CR575G that I set up at 10:1 compression with de-catted head pipe and it ran way better and made 98HP /110 TQ when dyno tuned

Fast forward to today Mega Flo installed an 4 3/8" S&S crank, machined the cases for S&S 4.125 cylinders and pistons, 58mm intake with 6.2 inj and the G575G cams set @ 10:2 and it run cool not high compression and runs awesome! It dyno tuned 116hp/127tq.

Good luck

 

[Longbeard71]

I have a 2011 I put the TTS100 cams in mine. I have been very happy with it.

 

[Gorilla]

I have a 2011 I put the TTS100 cams in mine. I have been very happy with it.

i have the same in my 2013 62k smiling miles

 

[al704]

Had TTS 100 in my 2012, great low end cam for twin cam