What did you do to your Trike this week?

[Rosy]

Deweydave, post pictures of the guards if you can. What type are they, the see through plastic or the embroidered type with the kit logo?
I was thinking of guards after I have mine fixed from the accident, love to see pictures.
Thanks.

Rosy

 

[Deweydave]

Deweydave, post pictures of the guards if you can. What type are they, the see through plastic or the embroidered type with the kit logo?
I was thinking of guards after I have mine fixed from the accident, love to see pictures.
Thanks.

Rosy

i just bought the rubber ones from Harley. Not much protection, but they look good (IMHO) and they install in about two minutes

 

[Rosy]

Looking good. Thank you very much for the pictures!

Rosy

 

[Missouri Charley]

Just been adding gas and riding. Me and Becky just got home from a 12 day ride around central U.S. Good to go on a trip with just the two of us, stopping when we wanted to sightsee or to smell the roses. This great country has a lot to offer if you just slow down and look around the next corner or over the next hill.

 

[Rosy]

Charley & Becky it is a great Nation! You are correct, don't stop smelling the roses.
Charley, I see from your aviator your new ride has the lights your old ride has in the Hannigan aqua shields. I remember years ago asking you about what size you used and all so I could put a pair on, but never did.
How does Becky like her back deflector from Kuryakin, I think I see one on your new ride, correct?
Great to see your post.

Rosy

 

[Missouri Charley]

Rosy we had the rear air deflector on the old trike and when we traded for the new one that's the first thing Becky wanted to add. She says it stops her head from bobbling around.

 

[Rosy]

I'll ask Janice if she has that problem on our trike? Our trike has a very tall windshield so maybe the air goes over her head. I know she tells me that she doesn't get wet when it rains, all the drops go over her head.
We were in MO, not far from you as the crow flies, in July, my Dad a Vet from WWII, Korea, and Vietnam was laid to rest at Jefferson Barracks National Cemetary and joined my Step-mother at her grave. Beautiful state you have there Charley & Becky!

Rosy

 

[Missouri Charley]

Rosy, you can be PROUD of your Dad's service to this great country and I applaud him. We travel up to that cemetery quite often just to honor our service men and women.

 

[Rosy]

Charley, it is a great place and half of my Family is buried there.
I am humbled by the number of Vets and their kin buried. It is just amazing to see the pure white headstones, row after row.
Stay warm Charley as I heard you are in for some cooler weather, which some people would say, it's great! But in the 60s in July!? LOL

Rosy

- - - Updated - - -

Next project, test my radio to see if it needs upgrading, so I can put some Polk db501s in the front. Check the radio's output with a voltmeter and determine if mine is a good one.
I think maybe I'll put a set in anyway, or wait to add it to my winter project list. Time...need more time in a day...maybe 30 hours would do it! LOL

Rosy

 

[Rosy]

OK, took all the "stuff" out of the trike. Now to get it to the body shop so it can be fixed in time to go to the NETT Rally in Vermont!

Rosy

 

[Rosy]

I am going to stir the pot a little. Who has installed new tires on this summer? How is it going, are you getting the mileage you expected, any problems with scalping, are your rear tires wearing OK, so are you happy with the new tires.
If you respond please include trike conversion, tire sizes, balance type, and pressures.
Thanks.

Rosy

 

[Gold Rush]

I am going to stir the pot a little. Who has installed new tires on this summer? How is it going, are you getting the mileage you expected, any problems with scalping, are your rear tires wearing OK, so are you happy with the new tires.
If you respond please include trike conversion, tire sizes, balance type, and pressures.
Thanks.

Rosy

Rosy you sure are bored...... Come on back down here. I'll let you shine on my trike a while!!! epper:epper:epper:

Not Really.... But you know you are welcome to come back any time.

Hey, I found a new trick last Friday. A friend of mine gave me some polish a couple years ago and told me to put it on the windshield. Never mentioning the paint.. Another friend just got the same product for his airplane and is now using it on his car, truck, and GL1800. So after my breakfast ride last Friday I used the polish on the entire trike. Took all of 15 minutes to apply and believe me this is the slipperiest stuff I've ever seen. I laid my wiping rag on the rear fender and it fell off on the floor. Thought I was just clumsy until I laid it there the second time and watched it slip right off!! Here is the link to this wonder juice. http://www.sportys.com/PilotShop/product/12026. I promise you'll be impressed! My friend says he put it on his car windshield and the rain just sheds off!! :xszpv::xszpv:

 

[03VolusiaTrike]

Rosy,
Your asking about the biggest improvement we have made to our trike so far. We ride a 2003 Suzuki Volusia 800 (VL800) with a Lehman Romani conversion. Thought it rode real nice when we bought it...then we put new tires on. Holy S#*$! This thing rides like a different trike now. The front was a Dunlop D404f, replaced it with a Metzeler ME880, 130/90-16. Running 40-41 psi. The rear were the original Dunlop GT Qualifiers, 265/50r15 on Dayton spoke rims. We replaced them with Jegs polished aluminum rims and BF Goodrich Radial T/A's, 225/60r15. The new combination is 20 lbs per side lighter than the original spokes. Running 24psi left and 28psi right. Loving every mile now!!!!! Check out our albums for pictures. Ride safe everyone.

Russ and Vickie

 

[Rosy]

Looks like a wonder polish. I use the Honda spray cleaners on my windshield and it is great. Takes off the bugs in no time. The polish rag will fall off with the Honda spray cleaner also, slick stuff!
I guess the only place to buy it is through a web site. I wonder if any stores carries it, besides air craft type shops?
Thanks for the info. I am sitting while the grandchildren are asleep, the Ladies are shopping. That's not good!

Rosy

 

[Rosy]

That's the seat you made, correct? What a sharp looking ride.
How did you balance the tires, ceramic beads, regular method, or some other type of balancing?
Why the difference in tire pressure from one side to the other? Do you have large crowns in your roads up in your area? I know some roads in the South are really crowned because of the rain, so they have to offset the tire pressures.
Thanks for the photos.

Rosy

 

[03VolusiaTrike]

Yes I did make that seat for my wife, who has back problems. She loves it now and doesn't feel worried to get out there with me. I had a local speed shop balance the rears with stick on weights mounted on the inside of each rim so they don't show. The roads by me have a very big crowning to them for water drainage, which is why I run the different pressures. I got that info from this excellent forum... .thanks TT.

 

[Rosy]

You know what bolt patterns those rims fit? Are they Chevy, Honda, Ford, or some other automobile type?

Rosy

 

[03VolusiaTrike]

It is a Ford 6.75 inch ring gear solid axle rear differential with standard drum brakes. The lug pattern is 4 x 4.25. My rims are 15 x 7 with a 3.5 inch backspacing. ThumbUp

 

[Pegasus1300]

added chrome grill covers to the front turn signals and chrome rear speaker covers.

 

[Rosy]

Pegasus, do you have pictures of the new additions to your ride?
Like to see them if you have them.
Thanks.

Rosy

 

[Trikerbobbilly]

Mainly did my first round of maintenance, I changed out the timing belts, air filter, sub filter, cruise filter, added a super brace and shifter pivot, changed oil and filter and replaced a couple of pieces of plastic that were damaged. All in all about four hundred dollars in just parts, I would hate to see what a shop would have charged me, this was my first time working on a wing so I took my time and kept the manual handy.:xzqxz:ThumbUp

 

[Rosy]

WOW, I bet that Wing was totally apart for you to get everything done. You are correct, it would have cost you an arm & a leg! LOL
I know it cost me $135 to get the fluids changed, not oil and filter. So, all that work, WOW!
Great to hear you did all that work, maybe I should invest in a Honda Goldwing manual, instead of taking it in to the shop.

Rosy

 

[Trikerbobbilly]

Yea I had to take almost all of the tupperware off the bike to get to everything, most was common sense to get off but some I had to refer to the manual to take it off. I have worked on vehicles all my life including rebuilding the engine in my Jeep, so I am fairly confident in being able to do the maintenance myself but I would not recommend changing the timing belts yourself if your not fairly mechanically inclined, the procedure is very work intensive but doable if you just take your time and follow the manual. Since I didn't have access to the previous owner of the trike ( I bought it from the installer on consignment ) I like to due as much of the maintenance and fluid changes as I can as soon as possible so I know everything is in good shape and new, I still have the coolant and brake fluids to change out. I did find a few things that were broken during the install that were not repaired very well and I took the time to fix them properly.

 

[Rosy]

Good idea, I am doing the same thing with my 02 GL1800 Hannigan, little by little I am recording all the things being done to the trike and Goldwing so I have a record of what has been done and when it needs to be done again.
Just like you, second hand, so you start all over to get it right.
Question, how did your timing belt look and at what mileage did you do it? What does the manual say about replacement, mileage wise?
Thanks for the info.

Rosy

 

[Pegasus1300]

I am not at home Rosy but I will take some pictures for you and post them later. They may not tell you what you want to know as my trike is a 1500 not an 1800.

 

[Rosy]

That's OK, my brother-in-law has a 1500 and he like to see what is new out there, so he may upgrade his ride. The only problem is he does not have a computer so I show him the pictures when he comes over from Maine.

Rosy

 

[Rosy]

Does anyone have a Honda 2002 1800 Goldwing service manual that is not being used any more?
Thinking maybe you upgraded to a newer bike and it is just collecting dust! LOL
Looking for one.
Thanks.

Rosy

 

[Trikerbobbilly]

Rosy the timing belts didn't look bad but looks can be deceiving, the belts tend to wear minutely over time until the timing gets off just enough for the bike to stop running, its not a matter of the belts breaking, at least that is my understanding from the various post I have read. As to when this might happen is a matter of speculation and since the service manual does not give a service interval for the belts most agree it should be done between 46 and 65 thousand miles, my bike had right at 46 thousand miles on it so I felt it to be prudent to go ahead and change the belts.ThumbUp

 

[Rosy]

OK, so, I am at about 50,000, now it is the time to start seriously thinking about replacement.
Anybody else changed their timing belt on an 1800 lately?
Thanks for the info, great to know.

Rosy

 

[Mick]

Rosy the 1800 unlike previous wings has timing chains. Pretty much no maintenance required except for having your valve clearances checked. Thats what I like about the 1800 fill it with gas and go and once in awhile change the oil.