Turn Signals vs. Speakers Issue

[keikat2]

Has anybody ever had issues with the sound of the turn signals coming thru their infotainment speakers? This has been going on a while. However, at highway speeds, it's not heard due to the increased wind noise. Thank goodness, the blinker sound does not increase as the infotainment volume increases. My 2014 Trike has all front/rear LED lighting which I thought the LED issue had been resolved when Harley switched over to CANBUS connectors. In addition, several years ago, I installed a "Hogtunes" 200W 4 channel amplifier with J&M speakers that was a simple "plug-n-play" installation. Could these additions cause the blinker sound to be "picked-up" by the infotainment system? Thank you, Allen S.

 

[rhino 2]

Here in Jersey that wouldn't be a problem , Cause the use of turn signals are optional... ..

 

[jcbrew]

I had a similar issue when I worked on Goldwings, traced it to a loose (or broken) speaker wire connection at the speaker.

 

[Jack Klarich]

Electrical feedback problems can drive you crazy, and anything is possible. The first thing I would check for is good grounds on all components. I have seen crazy things happen with electrical gremlins. Good Luck and keep us informed:clapping: