Tri Glide steering damper

[Tonyd]

Well after spending $47 at Harley for the steering damper brackets and $52 for the damper on Ebay...its a good one original cost $250....and getting a heim fitting... drilling out a hole in damper so fitting will fit ... IT DOESNT WORK ON A 2003 ROAD KING....The head light nascel has side legs down to the cow bells....so when you attach the fork leg bracket....long chrome one......it is too far forward and the piston rod hits the nascel....so here I am SOL with the Harley style steering damper Oh well the best laid planes huh!...so now we know it wont fit on a Road King

Tony

 

[Pup]

If the piston rod is hitting the nascel it sounds as if something was mounted incorrectly somewhere. Try going to this website and scroll down. there is a video that is pretty straight forward. It shows exactly what needs to be done to install a damper on touring model Harley's. I hope this helps.

Steering Damper / Stabilizer for Harley Touring Models : eBay Motors (item 130386437408 end time May-01-10 14:42:37 PDT)

Pup

 

[Pup]

Also I noticed they put on a lot of spacers on the mounting bolts to get the damper low enough to work properly (ie clear the nascel).

 

[Ron58]

I got the one on ebay, Put it on my 02 Classic with a Lehman kit it hit my finder, I Drilled a hole in the tree an tapped it. Got rid of the front bracket, Works great. I Don't think it is still hitting my finder because of the DENTS before I got rid of the front bracket. But it is higher up.
Ron