Tire pressures for h-d anarchy wheels

[GARYD]

When I replaced my stock wheels/tires with the larger Anarchy wheels, I asked the service writer what the tire pressures should be. He said the same as stock. Even though when I checked the pressures, the rears were at 30psi and the front was 40psi.
Does anyone know for sure what the larger tire psi requirements are?
I did lower the rears to 30 and the front to 36.

 

[msocko3]

I wouldn't see where 36 front & 26 rear would hurt anything, you could double check the side wall of the tire to see what they list for pressure.

 

[GARYD]

Don't they usually just indicate the maximum amout of pressure of the tire?

 

[msocko3]

Don't they usually just indicate the maximum amout of pressure of the tire?

They would indicate max pressure and max load, you could also get with the tire manufacturer to see what they have to say.

 

[Doc B]

I did the same conversion and asked the same question. I eventually talked with customer service in milwaukee and the testers of the wheels and tires for the trike said use the same as the harley manual for the 15" wheels. I called Lehman trikes and they said if too soft a ride add more air, if too rough let some out. so 36 front, 26 rear and adjust to your liking.