THANK YOU ALL

[triwinggirl]

i'm sitting here checking my thread while i turn on my computer. i am always so amazed by the number of views i have. i am so grateful to my fellow trikers that are following my repairs. thank you for sticking with me, giving advise, and showing support though these long rebuilds, repairs and upgrades. i know its taken a lot of time, more than it should have. i think most of you understand why i wont quit thank you for the support.

im staying busy as i can but its the lay on the ground work on the clutch. it takes 1-2 days to recover depending on how far i push. hoping its the easy quick fix i diagnosed.

 

[Jack Klarich]

You go girl, keep up the progress. We will be watching:clapping:

 

[Gorilla]

You are doing a GREAT JOB and deserve a lot of credit for doing your own work. The stuff you are doing is stuff that most would take to a shop and have done. For your reasons you are "GETTING ER DONE" on your own.

 

[LadyonaMission]

I have been very impressed watching your progress. I do not reply because I know nothing useful. I did post this once.

 

[radismukes]

Keep on Truckin! Gal stay strong! :clapping:

 

[jjvw]

i'm sitting here checking my thread while i turn on my computer. i am always so amazed by the number of views i have. i am so grateful to my fellow trikers that are following my repairs. thank you for sticking with me, giving advise, and showing support though these long rebuilds, repairs and upgrades. i know its taken a lot of time, more than it should have. i think most of you understand why i wont quit thank you for the support.

im staying busy as i can but its the lay on the ground work on the clutch. it takes 1-2 days to recover depending on how far i push. hoping its the easy quick fix i diagnosed.

Yup, lifts are expensive, but sitting on a rolling stool, working at a proper height is darn well worth it. I built my own lift when I triked my bike. I got the steel and a welder for less than the price of a Harbor Freight lift.

I have seen several designs on u tube, made of 2x4s and plywood, even cinder blocks and 2x10s. I was thinking about doing one out of plywood boxes and 2x10s, that could be shifted around to allow working underneath and stacked in a corner when not needed. Look around on u tube, use your imagination and save your bod!!

 

[triwinggirl]

Yup, lifts are expensive, but sitting on a rolling stool, working at a proper height is darn well worth it. I built my own lift when I triked my bike. I got the steel and a welder for less than the price of a Harbor Freight lift.

I have seen several designs on u tube, made of 2x4s and plywood, even cinder blocks and 2x10s. I was thinking about doing one out of plywood boxes and 2x10s, that could be shifted around to allow working underneath and stacked in a corner when not needed. Look around on u tube, use your imagination and save your bod!!

yeah i saw a lot of the even a couple that would be buildable and useable. however i dont know anyone with metal or a good enough welder to do the job. i was thinking one with a center rail and side plates in the back removable if needed. this would give total access and be able to jack from the center. might be to tippy though.

 

[BrokenBackJack]

You are doing a great job and i enjoy reading what you are doing so keep up the great work.

Thanks for posting.

With all my neck and back surgeries and a mini and major stroke i know what you are saying and i feel your pain also. Been down that same trail many times but hey we are still alive and able to somewhat function so life is good!