Riser Kit on raked Trike

[minnleeboy]

I would like to put a set of pull-back risers on my Trike. It is a 2005 GL1800/Roadsmith with the rake kit installed on it. When I look at the top cover on the handle bars , it looks like it is just about ready to start rubbing against the meter panel above it. I am concerned that if I installed the pull-back risers, they will not clear the meter panel. Has any-one tried something like this? Thanks for any feed-back.

Lee

 

[kj5ix]

I use the MBL Narrow Risers on my 1800, and it does hit the back of the panel a little on full turns, but I haven't worried about it.

 

[Big0]

Bought a rake to pull back the handlebars and found out they
could not be installed with the triple tree 6 degree rake due to
the upper forks being now to large.

i have a 2004 shadow 750 trike.

 

[Konrad]

I have a 2006 GL1800 RoadSmith. Prior to converting I had installed the Kuryakin Risers. No problems with installing the rake kit my installer ordered from RoadSmith. Everything works fine.

 

[Tango]

MBL Narrow Riser Set Back on mine. ThumbUp Tom :Spying:

 

[hitime]

I have an '05 GW with MotorTrike kit and have the REG risers on it. No problems.

BTW, I have the 4.5 degree easy steer kit.

 

[B-2]

Will the same riser kit work on a 1500, I have a 93 & really need to bring back the bars closer to me. I have been looking & can't seem to find any for the 1500. Thanks Bill