Primary Inspection Cover Seal

[mirider]

Anyone know the OEM part number for the clutch inspection cover seal - 2014 TG

 

[HDB0B]

http://www.boardtrackerharleyonline.com/harley-davidson/gasket-service-kit-17369-06?page_580440596=5

17369-06 service kit includes 3 new o-rings for drain plugs and gasket for Primary cover.

Bob

 

[mirider]

http://www.boardtrackerharleyonline.com/harley-davidson/gasket-service-kit-17369-06?page_580440596=5

17369-06 service kit includes 3 new o-rings for drain plugs and gasket for Primary cover.

Bob

Thanks Bob, appreciate the info.......

phone your dealer

Since the nearest HD dealer is miles away, I usually buy parts on-line.

 

[mirider]

That's fine but phone your dealer and he or she will give you the correct part no.

I usually don't bother a retailer I don't intend to buy from......and isn't info like this what the forum is for

 

[Polock48]

Anyone know the OEM part number for the clutch inspection cover seal - 2014 TG

I have a 2014 TG too. Clutch Cover: 25416-99C

Primary Gasket: 34901-07

 

[HDB0B]

I have a 2014 TG too. Clutch Cover: 25416-99C

Primary Gasket: 34901-07

FWIW

25416-99C is for an older twin cam 88 motor CLutch Inspection cover.

34901-07 is the proper P/N for the Primary Cover big gasket .... not the clutch inspection cover.

FWIW I have the OEM 2014 Trike Parts Manual. 17369-06 is the P/N shown in the Parts Manual.

It is only sold with the 3 o-rings packaged with it.

Bob orag:

 

[Polock48]

FWIW

25416-99C is for an older twin cam 88 motor CLutch Inspection cover.

34901-07 is the proper P/N for the Primary Cover big gasket .... not the clutch inspection cover.

FWIW I have the OEM 2014 Trike Parts Manual. 17369-06 is the P/N shown in the Parts Manual.

It is only sold with the 3 o-rings packaged with it.

Bob orag:

Correct, 17369-06 is the "gasket service kit". 25416-99C is the seal for the inspection cover.

 

[HDB0B]

The newer TC 103 clutch inspection cover does not show the use of that flat gasket. I have changed my Primary fluid many times and have always used the newer style rubber ribbed gasket which fits in the primary cover groove.

I'm posting the 2014 Trike parts manual exploded view and hope this puts an end to this thread. :xzqxz:

 

[mirider]

I'm posting the 2014 Trike parts manual exploded view and hope this puts an end to this thread. :xzqxz:

Bob - Appreciate you clearing that up and thanks for posting the schematic. I went with your original response and ordered the kit. Didn't think I would cause this much controversy with a simple question.......

 

[Bogeysix]

We don't call that a Derby cover anymore???

 

[rhino 2]

Bob - Appreciate you clearing that up and thanks for posting the schematic. I went with your original response and ordered the kit. Didn't think I would cause this much controversy with a simple question.......

Thats the nature of forums... Sometimes without Voice-Inflection, The Typed word can sometimes be misconstrued.....:Shrug:

 

[moonstar]

flat gasket

We actually just changed all the fluids in our '14 Tri Glide today. We decided we would put the "Ride Free" derby cover on so we purchased that when we purchased the filter. The new derby cover does indeed come with a flat gasket part number 25416-99C and when you order the derby cover it does note that you need to purchase this gasket. The new derby cover is flat inside and this gasket is made to fit both the old ones with the groove and the new ones without the groove (per our dealer parts person).

This is a great forum to ask questions and learn information. Both my husband and I use this forum quite often as it seems there is always something to be learned about these machines! Unfortunately sometimes what I would call "attitude" seems to get in the way of getting answers.

 

[old soul]

Yes!

We don't call that a Derby cover anymore???

I do Bogeysix!