Help with I.D. of Coax leads

[bulkness]

Which one of these pic is CB coax lead and does the other look as a AM/FM lead should look?

Tony

 

[NamVet]

0850 is from the CB while the other is the AM/FM

 

[bulkness]

0850 is from the CB while the other is the AM/FM

I researched it further and if I understand it correctly the pic on the left is AM/FM/Weather and the right pic is the CB. If I am correct I have not seen a CB connection of that type before.:blush:

 

[Gorilla]

CB connection looks okay to me. Wire attaches to the center of the antenna.

 

[PIGGI]

And there should be another wire going to the ground plate.

 

[bulkness]

And there should be another wire going to the ground plate.

There is another wire going to the ground plate.
Thanks for the information.

 

[NamVet]

There is another wire going to the ground plate.
Thanks for the information.

where.....????

 

[Bikerbozo]

The right hand pic looks like just a ground wire. As far as my '10 TG goes, looking from back, the AM/FM is on left and CB is on right. If you look real close around bottom of antenna's, near base, it actually says what each one is. Bring a magnifying glass.

 

[bulkness]

The right hand pic looks like just a ground wire. As far as my '10 TG goes, looking from back, the AM/FM is on left and CB is on right. If you look real close around bottom of antenna's, near base, it actually says what each one is. Bring a magnifying glass.

AM/FM is on the left and the CB is on the Right. I checked both antennas and they are on the correct stud. The ground for the CB is 16 or 18 gauge and snap into a notched area on the metal plate. Today I made a ground strap from the plate to the frame. Hopefully this will help. My CB shop told me there is not a whole lot that can be done to improve on the CB attached to a motorcycle.