Hauling a Hannigan or CSC Trike

[David357]

For those of you who haul your Hannigan or CSC Trikes, I would appreciate your input on the model/brand of the trailer you are using.

Due to towing capacities of the SUV, I am looking for about a 500 lb. max. aluminum trailer weight capable of a cargo weight of 1200 lbs, without brakes and inside clearances in excess of 65" to handle the wide wheel based trikes fenders.

Is such a trailer manufactured?

 

[Motorcycle Mike]

I pull an Aluma TK1 behind my Ford Edge.
http://www.alumaklm.com/item/49-tk1-trike-trailer.html
Not sure your going to find an enclosed trailer with your weight restrictions

 

[Blueline]

Not enclosed. Triton AUT 1272. CSC fits very well on it.

 

[David357]

I pull an Aluma TK1 behind my Ford Edge.

http://www.alumaklm.com/item/49-tk1-trike-trailer.html

Not sure your going to find an enclosed trailer with your weight restrictions

Thanks Mike!

I am looking for an open trailer.

Are you towing a Hannigan or CSC wide trike?

I did research the Aluma TK-1 trike trailer.

Unfortunately the inside fender to fender clearance is 63".

Hannigan and CSC Trikes outside fender to fender wheel well widths are about 61.5" and 60.5" respectively.

The fender clearances seem a little too tight for loading or any trike transporting movements.

- - - Updated - - -

Not enclosed. Triton AUT 1272. CSC fits very well on it.

Thanks!

I will check it outThumbUp

 

[Motorcycle Mike]

My RSV has a Hannigan coversion on it.
Fits the Aluma with room to spare.

 

[David357]

My RSV has a Hannigan coversion on it.
Fits the Aluma with room to spare.

Thanks Mike!

What is your fender to fender width of your trike conversion?

 

[Motorcycle Mike]

I believe 61.5" is accurite but I'll put a tape measure on it when I get home and let you know.

- - - Updated - - -

Pics of a wing/Roadsmith on a tk1 in this thread.
http://www.triketalk.com/forum/threads/21094-Aluma-TK1-Trike-trailer?highlight=aluma+tk1

 

[3rdwheel]

I have a Hannigan conversion on my 2007 Ultra, and just last week I bought a Droptail trailer for it.

The trike fits and loads perfectly on the trailer, but with very little extra room to spare after the rear gate is in the up position. I just towed it in this morning so it could get a dyno tune, and the trailer did just fine going 70 mph.

The width is more than adequate. It would actually fit 2 bikes side by side.

I came with 2 chocks and a removable jackstand.

 

[leo3wheel]

Looking at a Drop-Tail trailer this weekend. It should fit our Yamaha RSV/Hannigan trike.

http://www.droptailtrailers.com/two-...e-trailer.html

 

[jtilmon]

I have the Aluma MC210 and it will work for your Hannigan or CSC
We haul a Goldwing / Roadsmith and no problems.

also, you can reposition the wheel chocks and haul two touring motorcycles.

hope this helps

 

[David357]

Looking at a Drop-Tail trailer this weekend. It should fit our Yamaha RSV/Hannigan trike.

http://www.droptailtrailers.com/two-up-cruiser-sport-bike-trailer.html

Thanks Leo!

- - - Updated - - -

I have the Aluma MC210 and it will work for your Hannigan or CSC
We haul a Goldwing / Roadsmith and no problems.

also, you can reposition the wheel chocks and haul two touring motorcycles.

hope this helps

Thanks John!