Has anybody changed fender reflectors with LED lights

[kyblueultra]

Trying to change my fender reflectors with led's and add amber led's to my Lehman floorboard sides. Has anyone done this, if so, could you please list source and/or pictures. Thanks

 

[Lee H. Mann]

Trying to change my fender reflectors with led's and add amber led's to my Lehman floorboard sides. Has anyone done this, if so, could you please list source and/or pictures. Thanks

I did a set on a Monarch II. Went to Autozone and bought a set of flexible strip LED (White) and cut them down to fit under the reflector. Drilles 2 small holes beneath the reflector positions and kept the wires behind and between the board and fender. Lehman HOG EFX has 2 reflectors on each side so you might need 2 sets. I took one set and made 3 set with a soldering gun and about an hour of patience. It looks OK but not as good as a production light would. The customer was happy because there were no LED that would fit otherwise.

 

[trikermutha]

I have removed those ugly fender reflectors but did not put anthing in its place..

 

[FLTR2008TRIKE]

Here's a link to member of another forum who put a working light in place of the reflector on his fender >>> Harley Davidson Forums - TheJimer's Album: Thejimers Tri-Glide - Picture

Looks like he used a similar light to # 38215 on this page >>> LED Lights and Bulbs

For amber LED lighting heres a source for flexible LEDs you can get in different lengths >>> http://radiantz.com/index1.html?c5.html&1

 

[kyblueultra]

Thanks for your replies. I have seen one picture using a replacement led light for reflector, but cannot find it on the forum.