flashing brake light install

[schiel1]

I recently had my 2012 converted with a CSC kit. I used to have the lights flash with Wig-Wag kit. The installer did not set it up with it. He said that it will not work with the way the wiring is on the kit. Has anyone installed this or some other type on their CSC kit? I am going to the Wing Ding and thought maybe of finding a vendor there that may be able to do it while there but not sure if it is something they would want to get involved in if there is too much wiring. I do have the Hyper-Lites installed behind the speakers but I want as much as possible. I always took care in where I stopped behind vehicles at a stoplight and now that I am 61 inches wide it's hard to park on the side of the lane.

Has anyone added a couple extra hyper -lites to the existing hyper lights for a total of 4 sets to the one processor.

 

[Sully]

I installed this on mine. It plugs inline to the connecting wire to the battery. You can set the number of flashes, I've got mine at 7.

http://www.jpcycles.com/product/711-687

 

[SMSgt]

I have a Back Off on mine and it just wired in with out any issues and works great. The install had nothing to do with the trike kit.
Good luck and have fun.

 

[JaysGone]

I have the Back-Off too. I just wired it into the trunk lids lights.
Sits in there nice and works fine on the upper brake light bar only for me.
15 minute install. No beer job, as I don't drink.:laugh: