Finished up a lot of mods on 15 freewheeler

[trick trike]

I'll start at rear ...Tail lights from FXST. had to do some trimming to fit....Wyatt Gattling Fish tails ..Head pipe with out CAT..She's loud now...re-located tag...chrome rear bumper..Kuryakyn led light strip on trunk...Affliction/La choppers air cleaner...Love Jugs cooling fans....Road King passing lamps....14" apes...Clear view custom windshield with vent..Custom deep cut cow bells...The best part is the way she sounds now....I like it when you can hear me way before you see me...LOL

 

[gerald martin]

mods

Your bike looks great. When you put the 14 inch handlebars on did you have to change the brake and clutch lines, throttle control, and wires ext.? And what mount did you use for love jugs, Horn mount or frame mount?
Thanks

 

[trick trike]

Your bike looks great. When you put the 14 inch handlebars on did you have to change the brake and clutch lines, throttle control, and wires ext.? And what mount did you use for love jugs, Horn mount or frame mount?
Thanks

The only change was a screamin Eagle TBW it is longer and thinner a lot easier to thread through bars....Plenty of clutch and brake lines...I used the frame mount on the Jugs

 

[ol' school]

Good looking trike!!!

Nice looking Chevy truck in the background too!

 

[Sunman]

Trike looks great. What 14" handlebars did you use?

Sunman

 

[mstcswagb20]

Nice mods! Second on Sunman's question about the 14" bars. How much difference do they make over the stock bars? I'm 5'8" and have the stock bars rolled all the way back and I would really like to have another couple of inches closer to me to be comfortable. Is that a Corbin seat?

Glen

 

[gerald martin]

mods

The only change was a screamin Eagle TBW it is longer and thinner a lot easier to thread through bars....Plenty of clutch and brake lines...I used the frame mount on the Jugs

how about the wires did you have to extend them?

 

[rickm]

Boy it looks nice !!!! Like to know what bars you used and price, TBW length and price. Where did you get the bars and wire ? Another shortie that need's a couple more inches.

 

[Jack Klarich]

VERY NICE :clapping:

 

[rickm]

Trick trike , get back to us about those bars please

 

[tbear]

I'll start at rear ...Tail lights from FXST. had to do some trimming to fit....Wyatt Gattling Fish tails ..Head pipe with out CAT..She's loud now...re-located tag...chrome rear bumper..Kuryakyn led light strip on trunk...Affliction/La choppers air cleaner...Love Jugs cooling fans....Road King passing lamps....14" apes...Clear view custom windshield with vent..Custom deep cut cow bells...The best part is the way she sounds now....I like it when youView attachment 42782View attachment 42783View attachment 42784View attachment 42785View attachment 42786View attachment 42787View attachment 42788View attachment 42789 can hear me way before you see me...LOL

Nice job on the Trike, now, How about that truck!? it looks good too! pics?

 

[Traveling Man]

Nice Job!

I'll start at rear ...Tail lights from FXST. had to do some trimming to fit....Wyatt Gattling Fish tails ..Head pipe with out CAT..She's loud now...re-located tag...chrome rear bumper..Kuryakyn led light strip on trunk...Affliction/La choppers air cleaner...Love Jugs cooling fans....Road King passing lamps....14" apes...Clear view custom windshield with vent..Custom deep cut cow bells...The best part is the way she sounds now....I like it when youView attachment 42782View attachment 42783View attachment 42784View attachment 42785View attachment 42786View attachment 42787View attachment 42788View attachment 42789 can hear me way before you see me...LOL

I'm fairly new here, hope this is the correct way to giving kudos to your post/trike. BTW how did you attach the license plate. I am working on my Trike and what you have is one of my considerations. I may replace the reflector with a small license plate frame to resemble a model T look. Also considering nerf bars for the rear.

 

[trick trike]

Trike looks great. What 14" handlebars did you use?

Sunman

Wild ones chubby inch and a half

 

[trick trike]

I'm fairly new here, hope this is the correct way to giving kudos to your post/trike. BTW how did you attach the license plate. I am working on my Trike and what you have is one of my considerations. I may replace the reflector with a small license plate frame to resemble a model T look. Also considering nerf bars for the rear.

drilled holes below bumper to mount tag bracket..led lighted frame

 

[trick trike]

Trick trike , get back to us about those bars please

The bars are 1 1/2" Wild ones chubby 14"...

 

[trick trike]

Trike looks great. What 14" handlebars did you use?

Sunman

Wild one chubby 1 1/2"

 

[trick trike]

Nice mods! Second on Sunman's question about the 14" bars. How much difference do they make over the stock bars? I'm 5'8" and have the stock bars rolled all the way back and I would really like to have another couple of inches closer to me to be comfortable. Is that a Corbin seat?

Glen

These bars are Wild ones chubby 1 1/2"....The seat is so comfortable...It's a Mustang

 

[trick trike]

how about the wires did you have to extend them?

no

 

[trick trike]

Boy it looks nice !!!! Like to know what bars you used and price, TBW length and price. Where did you get the bars and wire ? Another shortie that need's a couple more inches.

The bars are Wild ones dchubby 1 1/2" around $130 ebay...Screamin eagle TBW $104 Harley dealer

 

[gerald martin]

mods

no

Thank you for answering all my questions. I hope you don't mind but I would like to copy most of the things you have done. Good thing is I live in Canada so our bikes most likely will never cross paths.

 

[rickm]

Not to be an ass but do you mean 1 1/4 bars ? I couldn't find 1 1/2 s

 

[rickm]

I'm sorry but you say you didn't have to make the wires any longer , is that because you bought a longer TBW ?

 

[Bigrig793]

Passing Lamps

I have been watching as you have been working on your Freewheeler and I must say it is looking good ! You say you used Road King passing lamps, is that the brackets as well and if so what year Road king are the brackets for ? Also did you have to do anything to the attachment points for the windshield.

 

[Grandpaspeed]

I'll start at rear ...Tail lights from FXST. had to do some trimming to fit....Wyatt Gattling Fish tails ..Head pipe with out CAT..She's loud now...re-located tag...chrome rear bumper..Kuryakyn led light strip on trunk...Affliction/La choppers air cleaner...Love Jugs cooling fans....Road King passing lamps....14" apes...Clear view custom windshield with vent..Custom deep cut cow bells...The best part is the way she sounds now....I like it when youView attachment 42782View attachment 42783View attachment 42784View attachment 42785View attachment 42786View attachment 42787View attachment 42788View attachment 42789 can hear me way before you see me...LOL

Your bike is awesome and thanks for sharing. I love the tail lights and if you would please provide the information on what modifications you did to get them installed and a few closeup pictures I would greatly appreciate it. Thanks

 

[ol' school]

Nice job on the Trike, now, How about that truck!? it looks good too! pics?

How 'bout it? More truck pics!!! :Shrug::biggrin:

 

[TOMMY M]

Whose bars did you use?

 

[TOMMY M]

Handelbars

No matter who I talk to I cannot get an answe from any shop can you please get me all info on bars make, part #. Thanks