DNA Conversion Help

[KDC]

Hello, I just joined hoping maybe someone could answer a question for me. I am helping my son do a trike conversion on his 2000 Dyna. His bike is in mint condition and I put a 95 inch kit in it last year along with Andrews cams and had the heads done by Bean at Big Boyz up in Maine . He bought a DNA axle and swing arm kit from some outfit in Florida.The kit is pretty simple to swap in considering it came with no instructions,LOL.

My question is about the brake system that came with it, it comes with a T-block to feed both rear calipers , but the T accepts regular flare lines and the bike master cylinder is the banjo type fittings. He has had a hard time even getting all the components for this conversion kit little lone any tech help. I was wondering if anybody here has ever used one of these and has any info on this ? Thank you in advance for any info you may have.

Thanks again , Kevin

 

[Jack Klarich]

Hi Kevin and welcome to Trike talk

Get a hold of Russel http://www.russellperformance.com/mc/brake-clutch-hose/adapter-fittings.shtml

You should still be able to get a banjo to 3/16th steel brake line adaptor, you may have to cut the male end off the steel line and reflare with a female nut for the feed line to the street T

Or use a union off the banjo male end

 

[rhino 2]

Kevin..........Welcome to Trike-Talk........:wave4:....

 

[trike lady]

Hello and :welcome: to Trike Talk, glad to have U with us. :clapping:

The seller is probably Art in motion out of Florida. http://www.artinmotionllc.net/

 

[Marc H]

:wave4:Welcome to Trike Talk Kevin!!!

 

[David357]

Hi Kevin,

:welcome: to our Trike Talk Family.:wave4::gathering::wave:

 

[ShapeShifter]

Hello!

:wave4:Kevin, Welcome from SW Arkansas.

Hope we get to see some completed photos after you and your son finish..

 

[Fearless]

Welcome to the forum from Western Pennsylvania, listen to Jack he knows what he is saying good luck ride safe Fred

 

[1dn5up]

:welcome: Good luck on the converstion, Ride Safe. :wave4:

 

[bdtmd1]

Welcome to the forums from Middle Georgia Kevin!

 

[KDC]

Thanks !

Thanks a lot for the welcomes fellas , and thanks for the info regarding the trike conversion ! I guess this was the least expensive trike conv. kit you can buy , he really does'nt have the money for the lehman or motortrike conversions , although those are really nice. I will ask him where he got it from next time he is here.

Thanks again , Kevin

 

[Ray Paige]

:wave4:Welcome From Montana:wave4::wave4:

 

[Lee H. Mann]

Kevin, Welcome to Trike Talk from West Virginia.:wave4: