How many posts will it take to find what number the ABS body Stallions started?
I have Stallion #616 ABS
I have Stallion #616 ABS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
How many posts will it take to find what number the ABS body Stallions started?
I have Stallion #616 ABS
I have ABS #530, black cherry.Wildbill we have ABS # 531 Black Cherry march 09 Stallion hope this helps Charlie D
here your answer 000101 was the first ABS per Rich at motortrike I own it 08 black cheryHow many posts will it take to find what number the ABS body Stallions started?
I have Stallion #616 ABS
How many posts will it take to find what number the ABS body Stallions started?
I have Stallion #616 ABS
Rick's story is a little incomplete. The first 50 produced in the fall of 2007 were demo's put out to their then current dealers. I believed they were number 101 to 150. They were all fiberglass when first produced. Somewhere around the time they ran out of drive trains (before the last 150 where obtained) they pulled alot of the first 50 demo's back in and re-bodied them with the plastic body and sold them. My wife has unit 406 and did have unit 175 and both of those are fiberglass. It was sometime in the 2009 production that they switched to plastic. My wifes 2008 unit 175 was delivered to her in March of 2008 and we were advised at that time she got the 25th production unit. We purchased it from the factory store in Daytona so the facts should be correct unless we were mis-lead by the bosses. The numbers all work out because they were only producing 2 to 3 a week because the fiberglass body was so labor intense especially at the beginning. But exactly what the first plastic body not counting the re-body ones has to be in the 450 to 550 area I would guess.
here your answer 000101 was the first ABS per Rich at motortrike I own it 08 black chery
heres your anwserHow many posts will it take to find what number the ABS body Stallions started?
Here's your Answer 2008 last three digits #101 and per Stallion ( Motor sports ) I own it , black cherry , it was a factory demo used for display only and returned back to the factory and was fitted with the new proto- type shell , changed from Fiberglass to ABS and then returned back as a Demo again.... it might not be thought as the first production ABS it was the first to have a ABS body...
I have Stallion #616 ABS
I'm new to forum, but my Stallion is ABS, 2009, # 522. When I bought it I had looked at fiberglass and decided against them, then changed my mind when ABS came out. I was told by self proclaimed largest Stallion dealer at that time, Nutting Trikes Miami OK, that mine was the 9th one of the ABS models. If that information was correct, it would make the fist one # 514.
Blessings to all,
PastorDannyP
Mine is ABS, # 522.The first VIN number for the first ABS Stallion Is # 517