Torque value on Honda GW Champion Independent rear hub

[Inventions2k]

I am busy re-doing my rear control arm bushes with local manufactured poly bushes as the original ones seems not to last. Can anyone pls give me the torque values on the rear hub nut.

Thanks

 

[mhgoldwing]

I think most hubs require 250 lb/ft of torque. HOWEVER, I would call Champion to verify, OR, if you know brand of hub then call local auto supply and they or internet can probably give you accurate answer.

 

[Papa Zook]

I think most hubs require 250 lb/ft of torque. HOWEVER, I would call Champion to verify, OR, if you know brand of hub then call local auto supply and they or internet can probably give you accurate answer.

You are right Mike. I had to remove a Roadsmith hub a while back and was floored that it was so high. I would give Champion a call to confirm.

 

[Jack Klarich]

You are right Mike. I had to remove a Roadsmith hub a while back and was floored that it was so high. I would give Champion a call to confirm.

Roadsmith calls out for 217ft lb of torque