rear bumper motortike honda conversion

[msbrown]

rear bumper motortrike honda conversion

Good morning,
We have been trying to get a rear bumper for our trike. we ordered a 45-8946 from add-on accessories and it is the wrong one. We can not send it back.:laugh:
SO we went to Ocala to a motortrike dealer and he says the number is 22315. BUT when I sent pix to motortrike.com they gave me the number mtby-00200. We r so confused. :xzqxz:
SO... Where do you find the serial number for your conversion? SO we can at least assure ourselves we have a fastback conversion(not sure 2+2) or not.
THe bike is a 2004 Honda Goldwing.

 

[THEREALTRIKKY]

Do you know when your bike was actually converted? Also, if you're able, upload a picture of the back of your trike, preferably from an angle. I'm sure there are a few of us on here who could help you ID your conversion!

 

[cavie]

Call Motor Trike. They can tell you where the serial # is located. It will be a sticker or metal tag that they put on it when it was built. My Champion WAS on the right swing arm but it gone!

 

[Gold Rush]

Re: rear bumper motortrike honda conversion

Good morning,

SO... Where do you find the serial number for your conversion? SO we can at least assure ourselves we have a fastback conversion(not sure 2+2) or not.
THe bike is a 2004 Honda Goldwing.

You are going to hate me for telling you this.... The serial number is stamped into the differential housing right above the input shaft. Yup, it's a real bear to get to and read. The only one I ever hunted down I put the trike up on three ramps so I could get underneath with a flashlight and mirror. You might want to go armed with a rag soaked in degreaser/cleaner. It gets pretty nasty dirty up there.

Good luck with your search. :xszpv: :xszpv:

 

[JaysGone]

On my MT Adventuer conversion.
The number is also stamped on the lower left rear frame rail.
Along with the middle of the bottom of the case.

 

[JaysGone]

Just thought Id add this picture of the kit numbers other location at least on mine.

 

[bikerbillone]

​Since I'm on a RS conversion, no comment....