New to trike talk

[Louie996]

Hello from Alabama just joined and looking foward to all the good info

on the site one question I have is I purchased a 98 gl1500se a few months ago

it has a slight viberation ataround 2k to 2.5k rpm if going up a slight incline not use to

this engine where do y'all usually shift at I normally shift at 3k rpm all belts and rollers

are new it has a compu fire alternator fresh tuning and service purchased at 100k

now has 107k miles runs great smooth idle anything to worry about as

far as slight virabition

 

[David357]

Hi Louie,:wave4:

:welcome: to the Trike Talk Family.:wave4::wave4:

 

[paws]

Hi Louie! Welcome to TrikeTalk from west Texas! These guys are pretty good at trouble-shooting...

 

[LadyonaMission]

Louie, I can't help you at all, but I can offer you a big TEXAS welcome. orag:

 

[PosseRider]

Welcome to TT Louie

 

[Louie996]

Thanks for the welcome glad to be here

 

[radismukes]

Howdy from South Texas :welcome: home of the Alamo!

 

[Jack Klarich]

Welcome to Trike Talk

 

[Trail Blazer]

Hello louie

l welcome to trike talk from east Texas. if you are shifting at 3k you are not lugging the motor. there will be some one with some knowledge on 1500 will be along soon to help. I have a 200 GW and I am trying to thing of what might cause the problem. I do know lugging the motor will cause some.

 

[Pooch]

Welcome to the board! Sorry I can't help with your problem. Trike west young man, trike west!!

 

[TGCarol]

Hi Louie :wave4: Welcome

 

[Louie996]

Thanks for all the replies the vibritation is only there on hills below 2500

rpm would be normal on any other bike these things just don't have

any as far as I have been told any way

 

[Gorilla]

welcome aboard Louie

 

[Rod69]

Welcome from Southeastern Illinois. :wave4:

 

[ol' school]

Hi Louie! Welcome to Trike Talk!

 

[Gone2Three]

Howdy Louie :wave4: welcome to TT from central Texas

 

[Marc H]

:wave4:Welcome from Tn

 

[Zammy]

Hi Louie, welcome to Trike Talk from western Florida. Sorry, no help with your problem.

 

[David357]

Hello from Alabama just joined and looking foward to all the good info

on the site one question I have is I purchased a 98 gl1500se a few months ago

it has a slight viberation ataround 2k to 2.5k rpm if going up a slight incline not use to

this engine where do y'all usually shift at I normally shift at 3k rpm all belts and rollers

are new it has a compu fire alternator fresh tuning and service purchased at 100k

now has 107k miles runs great smooth idle anything to worry about as

far as slight vibration

Louie,

I am going to copy your question listed above and post it in the Goldwing Tech Forum. Hopefully your question will get a little more exposure and response in the Goldwing Tech Forum.ThumbUp

 

[rhino 2]

Welcome to Trike-Talk........Lou.............:wave4: