Kuryakyn rear light bars

[thunder struck]

Has anyone put on the light bars on there tri glide and were do they plug into? I was thinking of buying them but wanted to here what others have to say

 

[Skeet7373]

Try this thread, several owners have installed the lights.

http://www.triketalk.com/forum/harley-trikes-6/new-kuryakyn-led-11543/

 

[thunder struck]

Thanks Skeet for the thread ,,but in the Kuryakyn catlog they say they plug in and was wondering if they plug inti the wireing harness of the tour pac luggage rack light or is there some other place to plug into

 

[427dave]

They plug in under the seat. There is a connector that is unpluged and Kuryakyn connector pugs into it and then the other end plugs into it. The Kuryakyn lights come with a male and female connector so it can be plugged in series with the Harley connectors. It is very easy to install. I installed them on my trike. With them there is a lot more light in the rear. You can download the Kury installation directions, from their website, so you can see what you have to do.

 

[thunder struck]

Thanks alot Dave thats just what Iwas looking for,,I will order them now ,,Thanks alot

 

[onahog]

Nice, i got a set coming too!!!

 

[CADOO]

Her are they way they look. Hope this helps and I like mine. They work with the turn signals and the brake lights. Maybe not the best photo but I tried. ThumbUp

 

[rmrc51]

Her are they way they look. Hope this helps and I like mine. They work with the turn signals and the brake lights. Maybe not the best photo but I tried. ThumbUp

Those look great! :10:

 

[CADOO]

Thanks pepper

 

[trikermutha]

Her are they way they look. Hope this helps and I like mine. They work with the turn signals and the brake lights. Maybe not the best photo but I tried. ThumbUp

do any holes have to be drilled?? or do the wires run under the tour pac??

 

[427dave]

Holes have to be drilled. One hole behind the lights to run wiring inside the trunk, then route the wires to the front of the trunk and drill two more holes to run the wires into the area under the seat. You have to take the trunk liner out as the wires run under it. They give you a small tube of silicone to put into the holes. You can download the installation instructions from the Kury website.

 

[CADOO]

Holes have to be drilled. One hole behind the lights to run wiring inside the trunk, then route the wires to the front of the trunk and drill two more holes to run the wires into the area under the seat. You have to take the trunk liner out as the wires run under it. They give you a small tube of silicone to put into the holes. You can download the installation instructions from the Kury website.

:Agree: Exactly ThumbUp