Khrome Werks 2x2 bars on Freewheeler?

[snyder3225]

Has anyone tried the Khrome Werks 2+2 narrow sweepers on a Freewheeler? I have seen some posts on TriGlides, but have been told the TG3 and the new Freewheelers are not the same. I've also read that the older Freewheelers are slightly different than the 2023/24, so fit may be different. I am hoping these bars would fit the Freewheeler also. I have a '24 Freewheeler.
Thanks!
Nikky

 

[RKplus10]

There are several threads (below under similar threads) related to those bars. Especially read the one from April ‘21.
Just my opinion, but there may be better choices for a Freewheeler with internal wiring. Take your time on the decision. When comparing, consider not only height and pull back but wrist angle, bar diameter, and finish (black or chrome), too. Good luck on getting it right the first time.

 

[snyder3225]

There are several threads (below under similar threads) related to those bars. Especially read the one from April ‘21.
Just my opinion, but there may be better choices for a Freewheeler with internal wiring. Take your time on the decision. When comparing, consider not only height and pull back but wrist angle, bar diameter, and finish (black or chrome), too. Good luck on getting it right the first time.

I read those, but they were on TriGlides mostly, or different years. I was hoping that maybe someone had tried them on a 23-24 model year Freewheeler; from what I've read on Harley's site a lot of the Freewheeler stuff is not interchangeable or they say things will not fit according to their website, but then it actually will. For reference, Khrome Werks' site (and some seller sites) says these will not fit the 2024 Freewheeler but that it will fit like the 2021. I'm new to all of this and don't know the differences between the model years. Was hoping someone else may have tried it, without me being the guinea pig so to speak