TG mudflaps

[trike1]

Any suggestions on installing? Do not want to drill fenders as per instructions!!!

 

[Oldmsocko]

I drilled my fenders. Not sure how you would install them if you didn't.

 

[njtrike]

I put them on per the instructions. Now if you want to be different you could mount them on the front of the fender

 

[trikermutha]

Any suggestions on installing? Do not want to drill fenders as per instructions!!!

I have seen velcro used on the inside of the fender to mount the mud flaps. No holes were drilled

 

[trike1]

Thanks for the input everyone, espically trikermutha. I"d planned on useing industrial strength velcro, using #6 screws and gorilla glue or black weatherstrip adhesive, or both on the flap and glue or adhesive on the fender. I"m testing to see which works better, and using the sealant around edges to keep water, dirt, etc out. Will keep you posted.

 

[trikermutha]

Thanks for the input everyone, espically trikermutha. I"d planned on useing industrial strength velcro, using #6 screws and gorilla glue or black weatherstrip adhesive, or both on the flap and glue or adhesive on the fender. I"m testing to see which works better, and using the sealant around edges to keep water, dirt, etc out. Will keep you posted.

FYI

They use adhesive strips for the lehman EFX running boards that seems to hold pretty good. Other Tri Glide riders have installed these on there trikes and seems to hold well.
Along with the black adhesive to seal the seams,

This shoud also work for mud Flaps

good Luck Glad I could help.

 

[eagle1]

contact cement?