reverse

[david lee]

does installing the mmd reverse alter the width to the outside of the clutch cover.thanks all

 

[BillR]

does installing the mmd reverse alter the width to the outside of the clutch cover.thanks all

Hi David. I'm not sure about an MMD reverse. I installed a Champion (from Papa Zook) on mine. It made the clutch cover about a half inch further out plus the width of another gasket. I hope that helps.

Reverse assembly



Assembly with cover installed

 

[rhino 2]

does installing the mmd reverse alter the width to the outside of the clutch cover.thanks all

With my 2011 Tri-Glide the reverse [Moto-Trike] was alterd Less than a half inch..12.7 MM..

 

[david lee]

With my 2011 Tri-Glide the reverse [Moto-Trike] was alterd Less than a half inch..12.7 MM..

it looks like im going to have to modify the ex pipe as the banjo bolt and line will clear thanks

 

[rhino 2]

it looks like im going to have to modify the ex pipe as the banjo bolt and line will clear thanks

A couple of taps with a ball peen hammer on the heat shield will solve the problem...ThumbUp.

 

[david lee]

A couple of taps with a ball peen hammer on the heat shield will solve the problem...ThumbUp.

it will be the pipe the heat shield only covers the outside of the pipe not the inside where the bolt is thank you