Replacement Floorboard Pads

[Coastie]

Noticed today my floorboard pads need replacement. Found these https://www.jpcycles.com/product/834-320/j-p-cycles-replacement-floorboard-pads for best price. Too late to call dealers but be surprised if they weren't more expensive. Just want plain no logos, chrome, etc. but with "isolation dampners built in."

Recommendations appreciated.

 

[DOKK]

Noticed today my floorboard pads need replacement. Found these https://www.jpcycles.com/product/834-320/j-p-cycles-replacement-floorboard-pads for best price. Too late to call dealers but be surprised if they weren't more expensive. Just want plain no logos, chrome, etc. but with "isolation dampners built in."

Recommendations appreciated.

The knobs on the bottom look identical to the ones on my HD pads. I don't see why they wouldn't work.

 

[PosseRider]

Noticed today my floorboard pads need replacement. Found these https://www.jpcycles.com/product/834-320/j-p-cycles-replacement-floorboard-pads for best price. Too late to call dealers but be surprised if they weren't more expensive. Just want plain no logos, chrome, etc. but with "isolation dampners built in."

Recommendations appreciated.

Hang loose a day. I will look to see if I still have the stock ones from my 2020. I replaced with some custom ones to match rest of stuff. If I didn't throw away ,you can have them for cost of mailing.

 

[PosseRider]

Sorry ,can't find those floorboards. :gah:

 

[Coastie]

Ordered tonight.

 

[Seaweed]

When I replaced mine on the EGlide I thought I would be smart and put a little silicone on the rubber bulbs to help them slide thru the holes but that turned out to be just the opposite. It made them slippery alright, too slippery to hold. There must be a trick to it but we got er done eventually.

 

[Jack Klarich]

When I replaced mine on the EGlide I thought I would be smart and put a little silicone on the rubber bulbs to help them slide thru the holes but that turned out to be just the opposite. It made them slippery alright, too slippery to hold. There must be a trick to it but we got er done eventually.

Dish soap or Windex works pretty good

 

[Coastie]

When I replaced mine on the EGlide I thought I would be smart and put a little silicone on the rubber bulbs to help them slide thru the holes but that turned out to be just the opposite. It made them slippery alright, too slippery to hold. There must be a trick to it but we got er done eventually.

Dish soap or Windex works pretty good

Wow! I was thinking about WD40. I'll use dish soap. Thanks guys.:clapping:

 

[Old Hippie]

Yes, Dawn soap is good for a lot of things other than washing dishes. LOL.

 

[Coastie]

I use it for hand soap. It is better than GoJo for grease. Even takes paint off hands with a brush. :laugh: