Rear tires on Hannigan

Dennis, from what I know (which ain't much according to some :D), it can and has been done. Depends on when your Trike (conversion kit) was produced. Can't go Wider but can go from 15" to 16". Kicker is the offset and overall diameter of Wheel/Tire combination must remain the same as the OEM overall diameter. You can go up to a 18" but that would require a Low-Pro tire and although look good (if you are into that "look") would roughen the ride up. Hard part is finding a Rim you like that has the proper offset. May require you to grind the inside of wheel well which can be Dicey and need a Surgeon-smooth touch to pull off which can be tough with a high rpm grinders as your scalpel. All about the Offset and Diameter of combination.
 
Hi,
My trike has an '05 conversion and I replaced the 14'' wheels and tires with 15'' rims from an Integra.
If this helps pm me and I can send pic's and more detail.
Good luck and ride safe!,
Tip
 

Welcome to the Trike Talk Community

Join our vibrant online community dedicated to all things Trikes! Whether you're a seasoned rider or just starting out, this is the place to share experiences, tips, and stories about your three-wheeled adventures. Explore modifications, maintenance advice, and rides, all while connecting with fellow trike enthusiasts from around the globe

Forum statistics

Threads
55,441
Messages
805,558
Members
23,994
Latest member
Dan2003
Back
Top Bottom