Pinch Bolts On EZ Steer Kit Missing

[gr8phun]

Have a 2013 Hannigan Kit installed by dealer in Jan this year
With an EZ Steer kit installed with a 6.0 or 6.5 degree rake

Missing two of four pinch bolts on the bottom that hold the forks

1.) What size are the bolts..............Just Got'em at Ace M8X125
2.) torque
3.)Do I need to adjust the lenght on the Forks

 

[Blackwillow]

You absolutely need to get back to your dealer on this.:gah: Am having issues with my dealer on install and hoping the manufacturer is coming to my rescue to resolve these issues. I went for a ride yesterday and found a young couple pulled over their passenger tire front missing ( no bolts in sight) and on the side of a serious down grade they just had, after a brief conversation just had a break job done less then a week ago. Me thinks the Mech did not torque the lug bolts. These kids got real lucky where they ended up, could have been much worse.

 

[gr8phun]

went to Ace Hardware

The bolts are M8X125
Got them

Looks like the lower pinch bolts should be torqued to 21 lbf-ft

 

[gr8phun]

Run a M8X125 nut on the bolts to clean up the threads

Put the bolts in and torqued them up

If I crash and burn it will either be because of the new bolts or
the Belly pan