Pairing Sena 10 to Scala Q3

[PWM]

Has anyone had any success pairing the Sena to the Scala?

My riding buddy and I were successful for close to a year then we both added Garmin Zumo 660's. We cleared all of our paired devices and now we can not link back up.

Any help would be greatly appreciated.

 

[Fabricater]

I have Sena 20 s , and had no luck pairing to scala

 

[PWM]

Hopefully someone on here has had success and will share. It worked fine for a long time until we added additional devices.

 

[PWM]

I have Sena 20 s , and had no luck pairing to scala

We finally had success. We put the Scala Q3 into pairing mode then we put the Sena 10 into "Universal Intercom Pairing mode" by holding the jog button for 8 seconds. You will hear a voice saying Universal Intercom Pairing. Within seconds, they were paired.

If you use a Zumo like we both do, whenever the Zumo is giving directions, it switches from the intercom mode. All you have to do is press the jog button and the link is re-established.