Changing Plugs on an Encore CSC with ground effects

[FRR]

For you folks who have a Wing from 2018 and newer with ground effects you have a real treat changing plugs or for any reason you need to get into the engine. The clamps that hold the front of the ground effects to the frame are virtually impossible to hook back up once it is down. It is a design nightmare. Very difficult to do without additional assistance from a buddy. If any of you good folks have already tackled this and know of any shortcuts that would help to simplify this process please respond. It took me 2 hrs to connect the left side and 3 1/2 with a friend helping me the next day to do the right. Thanks in advance for any suggestions

 

[Woody]

That don't sound like fun, do you have any pictures?

 

[DandyDoug]

The first question I have is , why did you feel the need to change the spark plugs ??

 

[BrokenBackJack]

The first question I have is , why did you feel the need to change the spark plugs ??

Say what????

 

[FRR]

That don't sound like fun, do you have any pictures?

No pics. Wore me out just doing the plugs

 

[FRR]

Say what????

Because spark plugs don't last forever and the manual recommended changing the plugs at 16,000 and I have over 25,000 on my trike

 

[BrokenBackJack]

Because spark plugs don't last forever and the manual recommended changing the plugs at 16,000 and I have over 25,000 on my trike

My response was for DandyDoug on why you changed your spark plugs. I figured it was time to change them otherwise you wouldn't have.

 

[FRR]

My response was for DandyDoug on why you changed your spark plugs. I figured it was time to change them otherwise you wouldn't have.

You are correct

 

[DandyDoug]

Got it.