Harley handle bars 55800589

DCR2013

30+ Posts
Apr 3, 2023
64
75
SHEBOYGAN
Name
Dewey
Looking for a set of handle bars, a bit more narrow and some small rise.
I find after two years of riding my 13 Triglide, making tight left turns I almost have to climb onto the tank.
That and the throttle is next impossible to work.

I was at my dealer today and he suggested this set of bars they've use on other trikes.

Do any of you have experience with these bars and could you give me your thoughts.
I'm 5'11".

Thanks for any advice.
 
+1 on the 2+2 Wide sweepers, the extra width will make it easier to turn.
I am 5, 10".
I was having the same problem with mine before I put these on.

I later added a rake kit from Papa Zook and that helped a lot also.

Bob
 
Before you order the bars from Harley, a guy might read some RECENT reviews on them. Several have reported issues with poor quality chrome and especially fitment of the throttle control on the end.

I’ve been through 4 sets of bars on my bike before finally settling. First was stock bars and were too low for my liking.

Then had to try 10” meathook apes. Hated them as I was reaching forward all the time and they were impossibly hard to turn (not effort, but reaching so far putting me off balance).

Then went with Krome Werks 2+2 wide sweepers. Again, I didn’t like them being so wide while turning.

Lastly, I ordered the Krome Werks 2+2 Narrow. Absolutely love them! I sit back in the seat comfortably now and I don’t have to reach while turning.

This is on a 2020 Ultra with stock seat, Roadsmith conversion, and a rake kit. 5’11” here as well.
 
I’ve had Wild Ones and KhromeWerks 2+2 narrow sweepers. Both much better than stock. Now on my 2024 I have KST 12” six bend bars. Like these best if all. Great quality. Full 1.25” diameter all through so easy to pull wires. Great customer service. Give them a call with questions.
 
Looking for a set of handle bars, a bit more narrow and some small rise.
I find after two years of riding my 13 Triglide, making tight left turns I almost have to climb onto the tank.
That and the throttle is next impossible to work.

I was at my dealer today and he suggested this set of bars they've use on other trikes.

Do any of you have experience with these bars and could you give me your thoughts.
I'm 5'11".

Thanks for any advice.
I have factory bars now. I have not purchased this part from the dealer, I'm gathering info as to what I may do.
Thanks for the replies so far.
 
Here’s a size comparison of Harley bars vs KhromeWerks 2+2 Narrow bars. As others have stated, my vote would be for the 2+2.
Thanks, I surely will be looking into these.
From the replys these bars appear to be a favorite.
We have an INDY in town, I plan on seeing them also.
 
Those Kromeworks 2 + 2 narrow bars have a desirable design feature (for me a 5'10" guy) in that they curve back to you. This means one side of your body is not over extended in reach when doing a tight turn. I would have my bars pulled back as far as reasonably possible to help this as well. I think this is more of an issue on the trikes than on the 2 wheelers.
 
Those Kromeworks 2 + 2 narrow bars have a desirable design feature (for me a 5'10" guy) in that they curve back to you. This means one side of your body is not over extended in reach when doing a tight turn. I would have my bars pulled back as far as reasonably possible to help this as well. I think this is more of an issue on the trikes than on the 2 wheelers.
Thanks for the info.
I too am 5'10". I find that making left turns, I fall short on the throttle.
Yes, I agree on the diff between two and four wheels. Never had that problem with my bagger.
Thanks again and stay warm up there in Alberta and please don't sent anymore of that cold weather down here.
 
Don't know what happened to the wx but at times I think it was warmer up here than you southern boys had it. Right now we are a couple of degrees above freezing.
 
Thanks, I surely will be looking into these.
From the replys these bars appear to be a favorite.
We have an INDY in town, I plan on seeing them also.
I took the advice from many of you on the Khromeworks 2 narrow bars.
Quite the difference, I really like these bars. So much better than factory bars. More comfortable and making turns are so much more better, I don't feel so stretched out.

thanks f or the help
 

Welcome to the Trike Talk Community

Join our vibrant online community dedicated to all things Trikes! Whether you're a seasoned rider or just starting out, this is the place to share experiences, tips, and stories about your three-wheeled adventures. Explore modifications, maintenance advice, and rides, all while connecting with fellow trike enthusiasts from around the globe

Forum statistics

Threads
55,369
Messages
804,476
Members
23,940
Latest member
jhlesher
Back
Top Bottom