Harley Logo illuminated on ground

[scuba1954]

I just added some Harley Logo lights to my trike to light up the ground in front of my rear tires. Just added the logos with some of the different colors showing on my trike.

 

[DK Custom Products]

Very cool. I saw something like that (not nearly as nice) a few years ago.

Care to share the details on how it works?

Kevin

 

[56Elwood]

Here's one source, there are others

http://www.buy4car.com/products/led...ector-lamp-for-harley-davidson-1400-1622.html

 

[scuba1954]

I bought them from Headlight Revolution for $72 a pair. I had some Stainless L brackets made and used 3M double stick tape and attached them to the inside of my rear fenders. It confuses people when they see them because the logo actually looks like it is projecting one side under the tire. I had looked at a lot of logo lights and found these which use a cree led which are a high quality led.

 

[RickDeVon]

Thanks for the clue to mounting...I got a pair for my birthday...how did you wire then in...

 

[DK Custom Products]

Here's one source, there are others

http://www.buy4car.com/products/led-...1400-1622.html

I bought them from Headlight Revolution for $72 a pair. I had some Stainless L brackets made and used 3M double stick tape and attached them to the inside of my rear fenders. It confuses people when they see them because the log actually looks like it is projecting one side under the tire. I had looked at a lot of logo lights and found these which use a cree led which are a high quality led.

Thanks guys. Not sure I'll do it...I've never run any highlight lights on any bike, nor felt the urge to. But those things are just so cool I might do it.

Kevin

 

[scuba1954]

The logo lights only come in one set off colors, orange and black with white letters. My leds change colors which make the logo lights look different depending on background colors.

Far as wiring I have my leds connected to a switch that is hot all the time. I tapped into that switch so I can have the lights on without needing the trike to be in accessory mode.

 

[Charlie in nc]

Logo lights

I bought a set of the ones that has the blue oval and put them under my running boards on our model A Really look COOL when at a stoplight!!

 

[HarleyPap57]

View attachment 29065View attachment 29066 View attachment 29064

I just added some Harley Logo lights to my trike to light up the ground in front of my rear tires. Just added the logos with some of the different colors showing on my trike.

Now this is pretty cool looking. May have to do something like this to mine

 

[Moe55]

I bought them from Headlight Revolution for $72 a pair. I had some Stainless L brackets made and used 3M double stick tape and attached them to the inside of my rear fenders. It confuses people when they see them because the logo actually looks like it is projecting one side under the tire. I had looked at a lot of logo lights and found these which use a cree led which are a high quality led.

Would you happen to have a picture of the bracket you had made?

 

[scuba1954]

Would you happen to have a picture of the bracket you had made?

No pics but it is a simple piece of metal that was bent 90 degrees to make an "L" The top of the bracket is about 1" above the light housing and the Width is about 1/4" wider on each side than the light housing. I spray painted it black and used 3M double stick tape to hold it in place. It is in the center of the inside of the front edge of the rear fender about 2" up from the bottom of the fenders edge.

 

[Moe55]

Thank you